Abrasives
Showing 1–20 of 48 results
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasives Max4540ZGQ Greenback Flap Disc
The Pearl Abrasives Greenback Zirconia Flap Disc features a fiberglass reinforce disc providing more strength and durability. The exclusive outer coating makes the disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material. The Greenback’s nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down, exposing more flap length.
Specifications:
▪ Abrasive: Zirconia
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Blending, Deburring, Surface Grinding
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 13,300
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
DeWalt DW8021R3 High Speed Cutting Wheel
The DeWalt High Speed Cutting Wheels are made with high-performance aluminum oxide grain that offers increased life and superior material removal, DEWALT Type 1 HP Metal Cutting High Speed Wheels feature 2 full sheets of thick fiberglass for strength and safety. A high grain concentration enables aggressive cutting action and smooth-running wheels.
Specifications:
▪ Arbor: 20
▪ Diameter: 14
▪ Grain: Aluminum Oxide
▪ Application: Ductile Pipe
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 67212 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
• Abrasive: Zirconia Alumina Z
• Workpiece Materials: Steel, Stainless Steel
• Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
• Diameter: 4 1/2 Inches
• Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Curve
• Max RPM: 13,300
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
|
Diameter: |
1″ |
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 67192 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Curve
▪ Max RPM: 13,300
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 06-B 458 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 80
• Shape: Flat
• Max RPM: 13,300
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
- Abrasive: Zirconia Alumina
- Workpiece Materials: Steel, cast iron (grey and nodular types)
- Application: Weld grinding, edge grinding
- Recommendation for Use: Provides optimum grinding results on high power pneumatic or electric angle grinders and high-frequency grinders.
- 5/16” thick discs provide additional strength and service life for heavy-duty applications.
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
Mini flap discs, particularly useful for weld dressing in hard-to-reach areas. These tools excel in performance when compared to plain coated abrasive discs in terms of service life and grinding performance.
Pferd 6″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Pferd 6″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
| Diameter: | 6″ |
Pferd 4-1/2″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Pferd 4-1/2″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
| Diameter: | 4-1/2″ |
Pferd 4″ .014 Carbon Steel Wire Full Cable Twist Knot Wheel
Pferd 4″ .014 Carbon Steel Wire Full Cable Twist Knot Wheel
Threaded Wheel Brushes – Full Cable Twist Knot Wheel
Narrow face allows better control of surface contact area. Full cable twist is ideal for the toughest brushing applications where surface finish is a low priority.
For optimal performance use on angle grinders.
Specifications:
|
Diameter: |
4″ |
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 06-B 454 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63405 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 13,300