Gas
Showing all 9 results
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark by Victor Purging Regulator
Weldmark by Victor single-stage purging regulator features a durable forged brass body and cap with a high delivery pressure. They also feature easy-to-read gauges, and a stem-type seat mechanism for accurate gas flow.
Primarily used by HVAC professionals for nitrogen purging. May be used with helium, argon, co2 or any other inert gas.
Specifications:
- Gas Service: Inert Gas
- CGA: 580
- Outlet Connection: ¼”-37
- Delivery Pressure: 500 psig
- Max Inlet Pressure: 3000 psig
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor Regulator Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Weldmark 2″ Brass Replacement Gauge 4000 PSI
Weldmark 2″ Brass Replacement Gauge 4000 PSI
Weldmark 2” pressure gauge
Specifications:
- Diameter: 2”
- Thread: ¼”
- Measuring Range: 4,000 lbs.
- Material: Brass
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote brand Twin Welding hose ¼ x 50ft T grade hose for all fuel types. B size fittings.
Specifications:
- Connection Type: BB
- Gas Type: All Fuel Gases
- Grade: T
- Hose I.D. [Nom] ¼”
- Hose O.D. [Nom] 3/8”
- Length [Nom] 50FT
- Material: Synthetic Rubber
- Operating Temp. [Min] -40 °F
- Operating Temp. [Max] 212 °F
- Pressure [Max] 200 PSI
- Thread Direction: Oxygen RH/ Acetylene LH
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor Torch Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Weldmark Balloon Inflator Regulator w/Handtight Nut/Gauge/Cutter/Hook
Weldmark Balloon Inflator Regulator w/Handtight Nut/Gauge/Cutter/Hook
Weldmark Balloon Inflator & Regulator
Weldmark balloon filling inflator and regulator for use with helium tanks to fill latex balloons. Easy to use, hand tighten to tank value then place balloon opening onto inflator nozzle and press the inflator down to release the gas into the balloon.
Features:
· Regulator with Full Size Hand-Tightening feature
· Easy to Read Pressure Gauge
· Durable Brass Fittings
· Fits all CGA-580 Tank Valves (the typical Helium, Argon, and Nitrogen valve on most tanks)
Harris Heavy Pre-heat Hand Cutting Tip for Propane/ Natural Gas
Harris Heavy Pre-heat Hand Cutting Tip for Propane/ Natural Gas
Harris Propane Cutting Tip
6290-4NFF Heavy Pre-heat Hand Cutting Tip for Propane/ Natural Gas
Typical Application: For Cutting Rusted or Dirty Steel with Propane/Natural Gas
Cutting Torch: 62-5F, 62-5AF, 880-F, 142-F
Recommended Attachments: 49-3F, 49-3AF, 39-3F
Weldmark 3/16″ X 12′ AA R Grade Acetylene
Weldmark 3/16″ X 12′ AA R Grade Acetylene
Weldmark Single line Red 3/16” x 12’ AA R Grade Acetylene hose
Specifications:
- Connection Type: A size fitting
- Gas Type: Acetylene
- Length: 12ft
- Pressure [Max 200 psi