Gas
Showing all 16 results
Best Welds Single Line Welding Hoses, 1/4″ Oxygen, T Grade
Best Welds Single Line Welding Hoses, 1/4″ Oxygen, T Grade
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor Regulator Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote brand Twin Welding hose ¼ x 50ft T grade hose for all fuel types. B size fittings.
Specifications:
- Connection Type: BB
- Gas Type: All Fuel Gases
- Grade: T
- Hose I.D. [Nom] ¼”
- Hose O.D. [Nom] 3/8”
- Length [Nom] 50FT
- Material: Synthetic Rubber
- Operating Temp. [Min] -40 °F
- Operating Temp. [Max] 212 °F
- Pressure [Max] 200 PSI
- Thread Direction: Oxygen RH/ Acetylene LH
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor Torch Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
This Hotspotter is an all-purpose propane flame tool that operates off the pressure of a standard propane tank-no regulator required. Ergonomic handle with adjustable trigger. Hooks up to standard 20 lb. Propane tank. Operates with no smoke and no fumes.
Appropriate for a wide variety of all-season maintenance/repair applications at commercial offices, factories, institutions, warehouses, parks, residential properties, farms, and parking lots.
Some uses include:
▪ Burn weeds
▪ Repair asphalt
▪ Seal tar
▪ Peel paint
▪ Remove road markings
▪ Melt ice
▪ Thaw pipes
Features and Specifications:
▪ Delivers up to 550,000 BTU
▪ Durable 10 ft. neoprene hose
▪ Accurate brass flow control shut-off valve
▪ Brass propane tank adaptor
▪ Spark ignitor
▪ Durable cast iron and steel nozzle (WB-101)
▪ Welded tube nozzle (WB-100 & WB-102)
▪ 31″ Heavy-Duty Handle
▪ Meets NFPA 51 specifications
▪ Excess Flow Valve
▪ One year warranty
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor Turbo Torch Genuine Sof-Flame WA-400 Acetylene Torch Handle for your Sof-Flame soldering equipment. Handle accepts all S series tips and most major brands of “screw-in” soldering tips.
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Cuts up to 8-inch (203 mm) thick steel. Solid silver-brazed construction. Features o-ring seating and easy-to-change slip-in Graf-Tite cutting tips with cost-saving soft seats. Use with any industrial fuel gases “” acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special-purpose tips are available for use in SC200 Series cutting attachments. SC200 series torch handles are covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Handles:
- WH200A
Compatible Tips: Welding: SC Series Tips
FEATURES:
SPECIFICATIONS:
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Valved “Y” Connections, 200 PSIG, Brass, Female/Male, RH, 9/16″ – 18
Valved “Y” Connections, 200 PSIG, Brass, Female/Male, RH, 9/16″ – 18
Miller-Smith Heavy Duty Cutting Torch Handle
Miller-Smith Heavy Duty Cutting Torch Handle
Heavy-duty handle allows high gas flow for large cutting tips and heating tips. Heavy-duty handles have replaceable hose connections. “B”-size inlet connections are 9/16″-18. Length: 7.5 inches (191 mm). Torches have silver-brazed joints to provide overall strength and rigidity for safe performance under rugged conditions. Works with all SC Series cutting tips, ST Series heating tips and SW Series welding tips.WH200A torch handle is covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Cutting Attachments:
• SC209
• SC205
FEATURES:
Victor ST1000FC VanGuard Heavy Duty Cutting Torch With 90° Head
Victor ST1000FC VanGuard Heavy Duty Cutting Torch With 90° Head
Genuine Victor® ST 1000FC is a heavy-duty straight cutting torch with bottom, rear-mounted cutting oxygen valve lever. It designed for use in scrap yards, demolition and foundry work. The ST 1000FC has a forged 90° brass head with stainless steel gas tubes and comes complete with built-in reverse flow check valves and flashback arrestors. It can cut up to 5 inch thick steel using Victor “1” series cutting tips. For use with any fuel gas, 5 PSIG and above. Hose connection – 9/16″-18 (B)
Victor 100FC 100 Series “VanGuard” Medium Duty Torch Handle
Victor 100FC 100 Series “VanGuard” Medium Duty Torch Handle
Weldmark 3/16″ X 12′ AA R Grade Acetylene
Weldmark 3/16″ X 12′ AA R Grade Acetylene
Weldmark Single line Red 3/16” x 12’ AA R Grade Acetylene hose
Specifications:
- Connection Type: A size fitting
- Gas Type: Acetylene
- Length: 12ft
- Pressure [Max 200 psi