Welding
Showing all 12 results
![](https://store.tollgas.com/wp-content/uploads/2018/03/ALC-300x300.jpg)
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
![](https://store.tollgas.com/wp-content/uploads/2018/03/ALC-500x372.jpg)
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
![](https://store.tollgas.com/wp-content/uploads/2019/01/ALC1-300x300.jpg)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
![](https://store.tollgas.com/wp-content/uploads/2019/01/ALC1-450x372.jpg)
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
![](https://store.tollgas.com/wp-content/uploads/2018/08/Weldmark-ER70S-6-300x300.jpg)
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
![](https://store.tollgas.com/wp-content/uploads/2018/08/Weldmark-ER70S-6-500x372.jpg)
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
![](https://store.tollgas.com/wp-content/uploads/2018/03/ALC-300x300.jpg)
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
![](https://store.tollgas.com/wp-content/uploads/2018/03/ALC-500x372.jpg)
![](https://store.tollgas.com/wp-content/uploads/2018/10/MIL206186-300x300.jpg)
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
![](https://store.tollgas.com/wp-content/uploads/2018/10/MIL206186-500x372.jpg)
Miller .030” – .035’” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Roughneck
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
![](https://store.tollgas.com/wp-content/uploads/2018/10/WEMWM71TGS03510-300x300.jpg)
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
![](https://store.tollgas.com/wp-content/uploads/2018/10/WEMWM71TGS03510-501x372.jpg)
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
![](https://store.tollgas.com/wp-content/uploads/2018/10/LINED015790-300x300.jpg)
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
![](https://store.tollgas.com/wp-content/uploads/2018/10/LINED015790-500x372.jpg)
![](https://store.tollgas.com/wp-content/uploads/2018/10/ANC1430-300x300.jpg)
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
![](https://store.tollgas.com/wp-content/uploads/2018/10/ANC1430-500x372.jpg)
Best Welds, Tweco Model 14-30 .030” 14 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #2
▪ Professional #3
▪ Professional #4
▪ Spray Master Series MIG Guns
![](https://store.tollgas.com/wp-content/uploads/2018/02/ANC000067-300x300.jpg)
Best Welds .030 Miller Style Contact Tip
Best Welds .030 Miller Style Contact Tip
![](https://store.tollgas.com/wp-content/uploads/2018/02/ANC000067-500x372.jpg)
Best Welds, Miller Model 000067 .030” Replacement Contact Tip.
Replacement tip designed for .030 inch (0.9 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
![](https://store.tollgas.com/wp-content/uploads/2018/11/ANC11T30-1-300x300.jpg)
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds .030 Tweco 11 Series Tapered Contact Tip
![](https://store.tollgas.com/wp-content/uploads/2018/11/ANC11T30-1-500x372.jpg)
Best Welds Tweco Style 11 Series .030 Tapered Contact Tip
Compatible with:
- Anchor Brad 135 Gun
- Best Welds® 135 Gun
- Tweco® Mini ®
- Tweco No.1 Gun
![](https://store.tollgas.com/wp-content/uploads/2018/10/LINED031407-300x300.jpg)
Lincoln Super Arc L-50 ER70S-3 Copper Coated Carbon Steel MIG Wire .030 33# Spool
Lincoln Super Arc L-50 ER70S-3 Copper Coated Carbon Steel MIG Wire .030 33# Spool
![](https://store.tollgas.com/wp-content/uploads/2018/10/LINED031407-500x372.jpg)
Specifications
Diameter: | .030 |
Package: | 33 lb. Spool |
SKU: | LINED031407 |
![](https://store.tollgas.com/wp-content/uploads/2018/10/ANC1130-300x300.jpg)
Best Welds .030 11 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 11 Series Tweco Style Standard Duty Contact Tip
![](https://store.tollgas.com/wp-content/uploads/2018/10/ANC1130-500x372.jpg)
Best Welds, Tweco Model 11-30 .030” 11 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #1
▪ Spray Master Series MIG Guns