MIG & Flux Core (GMAW/FCAW)
Showing 81–100 of 153 results
Drive Roll Kit .025-.035 in.
Drive Roll Kit .025-.035 in.
DETAILS
Drive Roll Kit .025-.035 in (.6-.9 mm) Solid SP-255 WM-255
Features
- Drive Roll Kit .025-.035 in
- (.6-.9 mm) Solid SP-255 WM-255
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 403-20-116 1/16″ TOUGH LOCK™ Heavy Duty Contact Tip
- For 1/16″ (1.6 mm) wire
- Locking feature prevents contact tip and retaining head from overheating due to the loosening vibration often causes – cooler temperatures reduces wear and extends consumable life
- Greater Surface area contact between the contact tip, retaining head and neck ensures better heat dissipation and guarantees positive electrical conductivity
ESAB Dual Shield II 80-Ni1 H4 .045 33#
ESAB Dual Shield II 80-Ni1 H4 .045 33#
Industries
- Railcars
- Mobile Equipment
- Industrial and General Fabrication
- Civil Construction
- Bridge Construction
- Ship/Barge Building
Welding Process
- FCAW (Flux Core)
REBEL™ EMP 285IC 110-230V W/ Cart
REBEL™ EMP 285IC 110-230V W/ Cart
Featured
- Power to Perform – with 285A @ 40% (1ph model) and 285A @ 50% (3ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
- sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
- ESAB’s new 4 Roll Drive System weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in.(1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.0 mm) and TIG rods up to 3/16 in. (5.0 mm).
- Unmatched Portability/Mobility – weighing in at 70 lbs. (32 kg) with multi-voltage, multi-phase capability and 4 handle roll cage. Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site.
- TFT Multilingual Display – packed full of features, Rebel EMP 285ic has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting giving you the ability to fine tune your welds for the most optimal performance.
Industries
- Agricultural Equipment
- Industrial and General Fabrication
- Repair and Maintenance
- Civil Construction
- Training Schools
- Industrial Production & Manufacturing
Welding Process
- SMAW/MMA (Stick)
- GMAW (MIG/MAG)
- FCAW (Flux Core)
- GTAW-DC (TIG DC)
Bernard Centerfire Water-Cooled Gas Diffuser
Bernard Centerfire Water-Cooled Gas Diffuser
Bernard Brand, Model DW-1 Centerfire Water-Cooler Gas Diffuser/Tip Adapter. Price reflects minimum order of 10
Compatible with:
▪ Bernard™ W-Gun
Bernard Centerfire Small Gas Diffuser
Bernard Centerfire Small Gas Diffuser
Bernard Brand, Model DS-1 CenterFire Small Gas Diffuser/Tip Adapter.
Compatible with:
▪ BTB Series MIG Guns
▪ Clean Air Series
▪ Dura-Flux Fixed Liner Series
▪ FILTAIR Fume Extraction Series
▪ Legacy Q-Gun
▪ S-Gun Series
Best Welds .035 Tweco 14 Series Heavy Duty Contact Tip
Best Welds .035 Tweco 14 Series Heavy Duty Contact Tip
Tweco Style 14H-35 14 series heavy duty contact tip
Compatible with:
- Anchor Brand/ Best Welds 250/400
- Tweco No 2
- Tweco No 3
- Tweco No 4
Best Welds 1/16″ Tweco 14 Series Heavy Duty Contact Tip
Best Welds 1/16″ Tweco 14 Series Heavy Duty Contact Tip
Best Welds Tweco style 14 series 14H-116 heavy duty 1/16″ contact tip.
Compatible with:
- Anchor Brand/ Best Welds 250/400
- Tweco No 2
- Tweco No 3
- Tweco No 4
Best Welds 1/16″ Tweco 14 Series Contact Tip
Best Welds 1/16″ Tweco 14 Series Contact Tip
Best Welds Tweco style 14-116 contact tip
Compatible with MIG guns:
- Anchor Brand 250/400
- Tweco No 2
- Tweco No 3
- Tweco No 4
Best Welds .035 Miller Style Contact Tip – 10 pack
Best Welds .035 Miller Style Contact Tip – 10 pack
Contact tips 135430 for Miller® and Hobart® style spool guns. Tips are direct replacement for XR Edge, XRM15/30A, 15/30W and Spoolmatic™ 30A/W with straight (180 deg.) neck assembly.
These tips are not compatible with the FASTIP™ option available from Miller®
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds Tweco Style 11 Series .030 Tapered Contact Tip
Compatible with:
- Anchor Brad 135 Gun
- Best Welds® 135 Gun
- Tweco® Mini ®
- Tweco No.1 Gun
Best Welds .047 Miller Style Contact Tip 10 Pack
Best Welds .047 Miller Style Contact Tip 10 Pack
Contact tips 135424 for Miller® and Hobart® style spool guns running .045-.047 Aluminum wire. Tips are direct replacement for XR Edge, XRM15/30A, 15/30W and Spoolmatic™ 15A & 30A/W with straight (180 deg.) neck assembly.
Anchor Miller Style .023 Standard Duty Contact Tip
Anchor Miller Style .023 Standard Duty Contact Tip
Replacement tip designed for .023 inch (0.9 mm) solid or flux-cored welding wires.
For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Best Welds .045 Miller Style Standard Duty Contact Tip
Best Welds .045 Miller Style Standard Duty Contact Tip
Works with gas diffuser Bernard Q/S series MIG guns or equivalent guns
Replacement tip designed for .045 inch (0.9 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
ESAB .035 Contact Tip For MT-200 Series MIG Guns – 5 Pack
ESAB .035 Contact Tip For MT-200 Series MIG Guns – 5 Pack
ESAB .035” Standard Duty Contact Tips (5 Pack)
Compatible with MT-200 MIG guns.