TIG (GTAW)
Showing 1–20 of 23 results
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 TIG Rod
Weldmark is a premium carbon steel multiple deoxidized wire. Produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2
Weldmark ER4043 Aluminum TIG Rod 1# tube
Weldmark ER4043 Aluminum TIG Rod 1# tube
4043 is a general purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloy contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. ER4043 can be used to weld various grades of aluminum.
| AWS Class: ER4043 | Certification: AWS A5.10/ A5.10M:1999 |
| Alloy: ER4043 | AWS/ASME SFA A5.10 |
Blue Demon Silicon Bronze TIG Welding Rod
Blue Demon Silicon Bronze TIG Welding Rod
Blue Demon Copper & Copper Alloy TIG Welding Rod has excellent welding properties and can be used on various applications.
ERCuSi-A
This silicon bronze (ERCuSi-A) rod is primarily used for MIG, TIG, and gas welding of copper, copper-silicon and copper-zinc base metals to themselves and to steel. It is an excellent choice for joining plain or galvanized sheet metal, as well as other coated steels. 1866° F melting point.
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
1/16” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (MSDS) for its use.
Weldmark ER308L Stainless Steel TIG Rod 1/16″X 36″ 1# tube
Weldmark ER308L Stainless Steel TIG Rod 1/16″X 36″ 1# tube
Weldmark ER308L06301T TIG Rod
Weldmark 308L Stainless Tig Rod. Similar usage as 308, but the 0.03% maximum carbon content increases resistance to intergranular corrosion.
Specifications:
· Diameter: 1/16”
· Length: 36”
· Weight: 1# Tube
J. W. Harris 5356 Aluminum TIG Rod 10# box
J. W. Harris 5356 Aluminum TIG Rod 10# box
0535630, 0535660, 0535650
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
Weldmark TIG Collet 1/16″ For HW-17, 18, 26 Torches
Weldmark TIG Collet 1/16″ For HW-17, 18, 26 Torches
J. W. Harris E70S-2 Steel TIG Rod 10# box
J. W. Harris E70S-2 Steel TIG Rod 10# box
ESAB Spoolarc 65E Carbon Steel TIG Rod
ESAB Spoolarc 65E Carbon Steel TIG Rod
ESAB Spoolarc TIG Rod
ESAB Spoolarc 65 is a triple deoxidized (Aluminum, Titanium, Zirconium) welding wire designed for welding over rust and mill scale. The less fluid weld puddle of Spoolarc 65 makes it easy to control when used out of position. Spoolarc 65 is the preferred wire for all position welding of small diameter.
Specifications:
▪ Classification: AWS A5.18:ER70S-2 H4
▪ Approvals: MIL-E-23765/1 70S-2
Weldmark 1/16″ TIG Gas Lens Collet Body For HW-17, 18, 26 Torches
Weldmark 1/16″ TIG Gas Lens Collet Body For HW-17, 18, 26 Torches
Weldmark 1/16″ TIG Collet Body For HW-17, 18, 26 Torches
Weldmark 1/16″ TIG Collet Body For HW-17, 18, 26 Torches
Lincoln ER70S-2 Carbon Steel TIG Rod 1/16″ X 36″ 50# box
Lincoln ER70S-2 Carbon Steel TIG Rod 1/16″ X 36″ 50# box
Lincoln ER70S-2 contains zirconium, titanium, and aluminum in addition to silicon and manganese, Produces x-ray quality welds over most surface conditions, Recommended for TIG welding on all grades of steel. Ink jet printing identification on entire length of electrode.
Specifications:
▪ AWS: ER70S-2
▪ Diameter: 1/16”
▪ Length: 36”
▪ Weight: 50# box