Description
Aluminum Oxide A – Standard (Plain Arbor Hole)
Specifications:
|
Diameter: |
4-1/2″ 5″ |
62453, 62503
Pferd Fibre Disc Aluminum Oxide 36 Grit
$1.65 – $17.91
For general purpose grinding, from coarse to fine, in diverse applications.
Additional information
| Package Size | 1, 10 |
|---|---|
| Brand | Pferd |
| Diameter | 4 1/2, 5" |
| Grit | 36 |
| Type | Fibre Disc |
Related products
COMBIDISC® Backing Pads – For Type CDR Discs
COMBIDISC® Backing Pads – For Type CDR Discs
From coarse grinding through surface texturing to face-down mirror polishing,
These products address the most demanding and sophisticated machining tasks.
42460
STARTING AT
$20.31
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
|
Diameter: |
7″ |
62713
STARTING AT
$3.48
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 42517 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 60
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
42517
STARTING AT
$1.24
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45184 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 1 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 25,000
▪ Recommended RPM: 15,000
45184
STARTING AT
$6.86
Reviews
There are no reviews yet.