Limited Quantities and overstock items.
Sale Items
Showing all 14 results
LN-25 PRO Wire Feeder Used
LN-25 PRO Wire Feeder Used
LN-25 PRO series wire feeders are designed to be simple, reliable and easy to service. Whether you are an ironworker, pipeline welder, or weld at a construction site, shipbuilding facility or metal fabrication shop, we have the right semiautomatic wire feeder for you.
• Maxtrac® Wire Drive System – Heavy-duty cast aluminum wire drive system provides reliable feeding and durability.
• Dual Range Wire Feed Speed – Delivers greater precision at low end wire feed speeds.
• Trigger Interlock Switch – Provides operator comfort for long welds.
• Replaceable and Flame Resistant Case – Rugged and durable case can be replaced in less than five minutes.
• Potted PC Boards – For moisture and corrosion protection.
MULTI-WELD 350 – USED
MULTI-WELD 350 – USED
DETAILS
Connect Several DC+ Welders to One Power Supply.
The Multi-Weld 350 is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the Multi-Weld 350 offers an entirely new and better way to build large structures. This unique system offers a cleaner, safer job site, and allows operators to have high performance welding control right where they need it — at the arc.
- Independent arcs. Starting or stopping one Multi-Weld doesn’t affect the welding of the others.
- The Multi-Weld 350 is capable of continuous operation at 350 amps in 122°F (50°C) air temperature.
- No control cables are needed. Single weld cable output from the power source to one or several Multi-Weld 350s.
- Controls are located close to the operator for quick access.
- High efficiency design uses less than half the power of other grid systems.
- Lincoln Chopper Technology™ for quality welds with instant control of the arc for superior welding results.
- Constant voltage (CV) for MIG or flux-cored wire welding.
- Constant current (CC) for stick welding or arc gouging.
- Additional stick welding controls include hot start, arc force, electrode type selection (E7018 and E6010).
- Arc gouging capability with a single Multi-Weld 350 and up to 5/16″ (8.0mm) electrode, or with paralleled units for up to 700 amps of power using a 3/8″ (9.5mm) electrode.
Features
- The Multi-Weld 350 is capable of continuous operation at 350 amps in 122 F (50 C) air temperature.
- Controls are located close to the operator for quick access.
- High efficiency design uses less than half the power of other grid systems.
- Lincoln Chopper Technology for quality welds with instant control of the arc for superior welding results.
- Arc gouging capability with a single Multi-Weld 350 and up to 5/16 in (8.0mm) electrode, or with paralleled units for up to 700 amps of power using a 3/8 in (9.5mm) electrode.
StormFront-FR, Rain Suit, 3 Piece
StormFront-FR, Rain Suit, 3 Piece
Product Description
The Cordova Safety Products brand StormFront-FR™ rain gear is Cordova’s most popular rain brand. It is constructed of yellow, .35 mm PVC/Polyester fabric and is available as rain suits or separate jackets and pants. The Stormfront-FR™ three-piece rain suit is flame resistant per ASTM D6413. It is equipped with a detachable hood with drawstring and ventilated cape back and underarms. It also offers two flapped pockets, a storm fly front with both zipper and snap buttons, and bib-style pants with suspenders and snap fly.
- Stormfront-HV™ 3-Piece Rain Suit
- Yellow, .35 mm. PVC/Polyester Fabric
- Detachable Hood with Drawstring
- Corduroy Collar
- Ventilated Cape Back & Underarms
- Two Flapped Pockets
- Storm Fly Front with Zipper & Snap Buttons
- Bib-Style Pants with Suspenders & Snap Fly
Certification/Rating: Flame Resistant (ASTM D6413)
Direct Safey Dakota Anti-Fog Safety Glasses
Direct Safey Dakota Anti-Fog Safety Glasses
Direct Safey Dakota Anti Fog and Hardcoat Lens Safety Glasses
Features and Benefits
- One-piece wraparound for wide view
- hardcoat lenses
Applications
- General purpose eye protection
- Areas where protection against bright lighting is needed
Lincoln Excalibur 8018-B2 MR
Lincoln Excalibur 8018-B2 MR
Top Features
- Designed for welding 1.25% chromium, 0.50% molybdenum steel
- Premium arc performance
- Square coating burn-off
- Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength after 8 hours of stress-relieving at 690°C (1275°F)
Typical Applications
- Power generation
- Petrochemical
- Pressure vessels
- Process piping
Welding Positions
All, except vertical down
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Mobile Light Tower – MLTSDW7
Mobile Light Tower – MLTSDW7
(See page 5 of the manual)
CURRENTLY HAVE 4 IN STOCK AT OUR PLYMOUTH LOCATION ONLY
The MLTSDW7 features:
- Lamps – (4) 1000W Metal Halide
- Lumen ouput – 440,000
- Lamp Connections – 3-pin quick disconnect
- Lamp design- heavy steel/aluminum construction w/ heat sink
- Engine- KUBOTA Tier 4 final diesel
- Engine Power-0 11.9HP at 3,600 RPM
- Engine Efficiency – 30 Gallon tank; 48 hour run time at 3/4 load
Dewalt T25 Torx Bit pkg 25
Dewalt T25 Torx Bit pkg 25
| Bit Tip Style | Torx |
|---|---|
| Bit Tip Size | T25 |
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 403-20-116 1/16″ TOUGH LOCK™ Heavy Duty Contact Tip
- For 1/16″ (1.6 mm) wire
- Locking feature prevents contact tip and retaining head from overheating due to the loosening vibration often causes – cooler temperatures reduces wear and extends consumable life
- Greater Surface area contact between the contact tip, retaining head and neck ensures better heat dissipation and guarantees positive electrical conductivity
LINCOLN SHIELD-ARC 85
LINCOLN SHIELD-ARC 85
Top Features
- For welding 0.50% molybdenum steel
- Light slag with minimal arc interference
- Deep penetration and superior puddle control
- Clean, visible weld puddle
- Capable of 480 MPa (70 ksi) tensile strength weld deposits
Typical Applications
- API 5L X42 through X56 grade pipe
- Cross country and in-plant pipe
Welding Positions
All
ESAB Dual Shield II 80-Ni1 H4 .045 33#
ESAB Dual Shield II 80-Ni1 H4 .045 33#
Industries
- Railcars
- Mobile Equipment
- Industrial and General Fabrication
- Civil Construction
- Bridge Construction
- Ship/Barge Building
Welding Process
- FCAW (Flux Core)
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
- Abrasive: Zirconia Alumina
- Workpiece Materials: Steel, cast iron (grey and nodular types)
- Application: Weld grinding, edge grinding
- Recommendation for Use: Provides optimum grinding results on high power pneumatic or electric angle grinders and high-frequency grinders.
- 5/16” thick discs provide additional strength and service life for heavy-duty applications.
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 11-T-142 Zip Cut-Off Wheel
Faster, cooler, freer cutting and heavily reinforced for added safety, zip-wheel provides premium performance while resisting twisting and bending. This allows for a true, straight cut every time. The end result is a wheel that improves worker safety while delivering the lowest cost-per-cut in the industry.
• Abrasive: Aluminm Oxide
• Workpiece Materials: Steel, Cast Iron, Stainless Steel, Sheet Metal
• Diameter: 4 1/2 Inches
• Thickness: 3/64 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69964 Cut-Off Wheel
The Pferd Unversial PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200