Free Shipping on Orders $100+
Copyright © 2023 Toll Gas & Welding Supply. All rights reserved.
Grinding
Showing 1–20 of 34 results
Techsouth Standard Diamond Wheel for Power Point Standard Tungsten Grinder
Techsouth Standard Diamond Wheel for Power Point Standard Tungsten Grinder
PPE-002
STARTING AT
$36.50
Fox Fire Abrasive Disc Conditioner
Fox Fire Abrasive Disc Conditioner
FOXFIRE Abrasive Conditioner
FOXFIRE™ is a revolutionary new grinding lubricant formulated to dramatically extend the life of abrasives and make grinding easier. FOXFIRE™ is a white, extra dry solid that is very clean to use. When applied to an abrasive surface, friction from grinding causes the FOXFIRE™ coating to melt, liquefy and act as a lubricant and release agent. Materials being ground do not load or clog cutting surfaces so abrasives run cooler and last longer. Unlike beeswax or petroleum based products, FOXFIRE™ is not sticky and parts can be blown clean.
FOXFIRE™ works best for grinding aluminum or plastic, removing automotive paint, or any other material that can melt into or clog abrasive surfaces. Discs or belts treated with FOXFIRE™ last longer… up to twenty times longer when grinding aluminum. Abrasive wheel cut off blades treated with FOXFIRE™ cut aluminum like butter without build-up on the cutting wheel. FOXFIRE™ also extends the life of abrasives used to grind stainless steel and carbon steel and leaves no residue that can affect welds made after grinding. In addition, FOXFIRE™ works well on saw blades, taps, drill bits and many other applications where a lubricant or release agent is needed or liquid coolant cannot be used.
Benefits:
▪ FOXFIRE™ increases productivity
▪ Non-toxic and safe
▪ Abrasives stay sharp much longer and cut faster
▪ Time once spent changing discs or belts can be used for grinding
WAX
STARTING AT
$8.20
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 67212 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
• Abrasive: Zirconia Alumina Z
• Workpiece Materials: Steel, Stainless Steel
• Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
• Diameter: 4 1/2 Inches
• Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Curve
• Max RPM: 13,300
67212
STARTING AT
$14.99
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasives Max4540ZGQ Greenback Flap Disc
The Pearl Abrasives Greenback Zirconia Flap Disc features a fiberglass reinforce disc providing more strength and durability. The exclusive outer coating makes the disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material. The Greenback’s nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down, exposing more flap length.
Specifications:
▪ Abrasive: Zirconia
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Blending, Deburring, Surface Grinding
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 13,300
MAX4540ZGQ
STARTING AT
$14.00
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
62182
STARTING AT
$8.81
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
06-B-456
STARTING AT
$10.90
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 67192 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Curve
▪ Max RPM: 13,300
67192
STARTING AT
$15.40
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
61301
STARTING AT
$8.17
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 06-B 458 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 80
• Shape: Flat
• Max RPM: 13,300
06-B-458
STARTING AT
$10.90
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
421-42305
STARTING AT
$5.44
Sale!
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
- Abrasive: Zirconia Alumina
- Workpiece Materials: Steel, cast iron (grey and nodular types)
- Application: Weld grinding, edge grinding
- Recommendation for Use: Provides optimum grinding results on high power pneumatic or electric angle grinders and high-frequency grinders.
- 5/16” thick discs provide additional strength and service life for heavy-duty applications.
PFE61616
STARTING AT
$9.21
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 08-B 462 HP Combo Wheel
The Walter high performance all in one cutting and grinding 1/8” wheels set new standards for performance in combined depressed center wheels (for portable angle grinders). They are specially reinforced to withstand the stress in off-hand cutting operations. Whether cutting, grooving, notching or light grinding, these wheels are guaranteed to give you the longest wheel life, fastest material removal and maximum safety.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting, Grooving, Notching or Light Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inch
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 13,300
08-B-462
STARTING AT
$3.69
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 06-B 454 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Flat
• Max RPM: 13,300
06-B-454
STARTING AT
$11.47
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
63429
STARTING AT
$8.76
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63405 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 13,300
63405
STARTING AT
$6.89
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63404 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/8
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
63404
STARTING AT
$9.37
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 63071 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 10,200
63071
STARTING AT
$12.34
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 63057 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 60
▪ Shape: Flat
▪ Max RPM: 10,200
63057
STARTING AT
$15.84
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62288 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 7 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 8,600
62288
STARTING AT
$18.02
Pferd 4-1/2″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 4-1/2″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62276 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
62276
STARTING AT
$16.69