Welding
Showing 1–20 of 474 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
LN-25 PRO Wire Feeder Used
LN-25 PRO Wire Feeder Used
LN-25 PRO series wire feeders are designed to be simple, reliable and easy to service. Whether you are an ironworker, pipeline welder, or weld at a construction site, shipbuilding facility or metal fabrication shop, we have the right semiautomatic wire feeder for you.
• Maxtrac® Wire Drive System – Heavy-duty cast aluminum wire drive system provides reliable feeding and durability.
• Dual Range Wire Feed Speed – Delivers greater precision at low end wire feed speeds.
• Trigger Interlock Switch – Provides operator comfort for long welds.
• Replaceable and Flame Resistant Case – Rugged and durable case can be replaced in less than five minutes.
• Potted PC Boards – For moisture and corrosion protection.
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
The METAL MAN Heavy Duty Single/Dual Bottle Welding Cart is designed for multiple uses. It can be used to hold portable wire welders, plasma cutters and TIG welders along with the bottle of shielding gas needed for that application. Its unique Cylinder rack allows you to configure it to carry one bottle of gas up to 10 inches in diameter and up to 300 cu. Ft.; or two separate bottles of gas up to 7-1/2 inches in diameter or 150 cu. Ft each. Or use this welding cart to hold two separate welders or a welder and a plasma cutter. The third use for this Cart is as a power source and feeder cart. The bottom shelf has an 18 inch clearance, giving ample space to store a smaller, inverter-based welding power source on the bottom shelf. The top shelf has ample space to fit a wire feeder. In addition, the top of the cylinder securement rack can be removed to accommodate the wire feeder spool holder and a large spool of wire.
SPECIFICATIONS:
- Holds one 10” dia. Cylinder or two 7-1/2” dia. Cylinder
- Fold Down Handle
- Wrap Around Cable Holders
- 400 lb. Capacity
- 8” Rear Wheels
- 2 Locking Front Casters
- Removable Top Cylinder Rack For Industrial Wire Feeder Applications
- 18 Gauge Steel Construction with Powder Coat Finish
FEATURES:
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Oxygen
Oxygen
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Model PX15-145 1/16” – 5/64” X 15’ Liner
Compatible with MIG Gun Profax 1260 Self Shielded Flux Core
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 TIG Rod
Weldmark is a premium carbon steel multiple deoxidized wire. Produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2
Miller Low-Conductivity Coolant 1 Gal
Miller Low-Conductivity Coolant 1 Gal
Propane
Propane
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Weldmark ER4043 Aluminum TIG Rod 1# tube
Weldmark ER4043 Aluminum TIG Rod 1# tube
4043 is a general purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloy contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. ER4043 can be used to weld various grades of aluminum.
AWS Class: ER4043 | Certification: AWS A5.10/ A5.10M:1999 |
Alloy: ER4043 | AWS/ASME SFA A5.10 |
Weldmark TIG Medium Size Back Cap For HW-20, HW-9 Torches
Weldmark TIG Medium Size Back Cap For HW-20, HW-9 Torches
MULTI-WELD 350 – USED
MULTI-WELD 350 – USED
DETAILS
Connect Several DC+ Welders to One Power Supply.
The Multi-Weld 350 is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the Multi-Weld 350 offers an entirely new and better way to build large structures. This unique system offers a cleaner, safer job site, and allows operators to have high performance welding control right where they need it — at the arc.
- Independent arcs. Starting or stopping one Multi-Weld doesn’t affect the welding of the others.
- The Multi-Weld 350 is capable of continuous operation at 350 amps in 122°F (50°C) air temperature.
- No control cables are needed. Single weld cable output from the power source to one or several Multi-Weld 350s.
- Controls are located close to the operator for quick access.
- High efficiency design uses less than half the power of other grid systems.
- Lincoln Chopper Technology™ for quality welds with instant control of the arc for superior welding results.
- Constant voltage (CV) for MIG or flux-cored wire welding.
- Constant current (CC) for stick welding or arc gouging.
- Additional stick welding controls include hot start, arc force, electrode type selection (E7018 and E6010).
- Arc gouging capability with a single Multi-Weld 350 and up to 5/16″ (8.0mm) electrode, or with paralleled units for up to 700 amps of power using a 3/8″ (9.5mm) electrode.
Features
- The Multi-Weld 350 is capable of continuous operation at 350 amps in 122 F (50 C) air temperature.
- Controls are located close to the operator for quick access.
- High efficiency design uses less than half the power of other grid systems.
- Lincoln Chopper Technology for quality welds with instant control of the arc for superior welding results.
- Arc gouging capability with a single Multi-Weld 350 and up to 5/16 in (8.0mm) electrode, or with paralleled units for up to 700 amps of power using a 3/8 in (9.5mm) electrode.
Acetylene
Acetylene
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
The Harris Stay-Silv 15 PhosCopper Brazing Alloy is the industry standard for air conditioning and refrigeration applications. Still widely used, but now often replaced by Dynaflow® in many HVAC/R applications. For many years the standard of the industry, the 15% silver alloy has proven its value. This filler metal is excellent for situations in which close fit-up does not exist, and where thermal expansion and service vibration are involved.
Specifications:
Diameter | 1/8″ |