Abrasives
Showing 1–20 of 42 results
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 67212 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
• Abrasive: Zirconia Alumina Z
• Workpiece Materials: Steel, Stainless Steel
• Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
• Diameter: 4 1/2 Inches
• Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Curve
• Max RPM: 13,300
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
Diameter: |
1″ |
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 67192 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Curve
▪ Max RPM: 13,300
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
- Abrasive: Zirconia Alumina
- Workpiece Materials: Steel, cast iron (grey and nodular types)
- Application: Weld grinding, edge grinding
- Recommendation for Use: Provides optimum grinding results on high power pneumatic or electric angle grinders and high-frequency grinders.
- 5/16” thick discs provide additional strength and service life for heavy-duty applications.
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
Mini flap discs, particularly useful for weld dressing in hard-to-reach areas. These tools excel in performance when compared to plain coated abrasive discs in terms of service life and grinding performance.
Pferd 6″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Pferd 6″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
Diameter: | 6″ |
Pferd 4-1/2″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Pferd 4-1/2″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
Diameter: | 4-1/2″ |
Pferd 4″ .014 Carbon Steel Wire Full Cable Twist Knot Wheel
Pferd 4″ .014 Carbon Steel Wire Full Cable Twist Knot Wheel
Threaded Wheel Brushes – Full Cable Twist Knot Wheel
Narrow face allows better control of surface contact area. Full cable twist is ideal for the toughest brushing applications where surface finish is a low priority.
For optimal performance use on angle grinders.
Specifications:
Diameter: |
4″ |
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63405 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63404 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/8
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 63071 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 10,200
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 63057 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 60
▪ Shape: Flat
▪ Max RPM: 10,200
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62288 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 7 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 8,600
Pferd 4-1/2″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 4-1/2″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62276 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit – Type 29
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit – Type 29
Pferd 62223 Polifan Flap Disc
The PFERD Performance Line SG Polifan Z-SG Power flap discs are some of the most efficient flap discs available. This line of flap discs feature significantly longer tool life, higher aggressiveness throughout the entire tool life, and a premium zirconia coating for high stock removal rates.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 60
▪ Shape: Conical
▪ Max RPM: 13,300
▪