Abrasives
Showing all 7 results
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
DeWalt DW8021R3 High Speed Cutting Wheel
The DeWalt High Speed Cutting Wheels are made with high-performance aluminum oxide grain that offers increased life and superior material removal, DEWALT Type 1 HP Metal Cutting High Speed Wheels feature 2 full sheets of thick fiberglass for strength and safety. A high grain concentration enables aggressive cutting action and smooth-running wheels.
Specifications:
▪ Arbor: 20
▪ Diameter: 14
▪ Grain: Aluminum Oxide
▪ Application: Ductile Pipe
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt DW3983 Bi-Metal Portable Band Saw Blade
The DeWalt Bi-Metal Portable Bandsaw Blades are packed with a Matrix II High-Speed Steel Edge, 8% cobalt content, and Rc 65-67 tooth hardness, DEWALT Bi-Metal Portable Bandsaw Blades can stand up to extreme heat and wear. An alloy steel backer resists fatigue.
Specifications:
▪ Length: 44 7/8 Inches
▪ Teeth Per Inch: 18
▪ Thickness: .02
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 06-B 458 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 80
• Shape: Flat
• Max RPM: 13,300
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 08-B 462 HP Combo Wheel
The Walter high performance all in one cutting and grinding 1/8” wheels set new standards for performance in combined depressed center wheels (for portable angle grinders). They are specially reinforced to withstand the stress in off-hand cutting operations. Whether cutting, grooving, notching or light grinding, these wheels are guaranteed to give you the longest wheel life, fastest material removal and maximum safety.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting, Grooving, Notching or Light Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inch
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 13,300
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 06-B 454 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Flat
• Max RPM: 13,300
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 11-T-142 Zip Cut-Off Wheel
Faster, cooler, freer cutting and heavily reinforced for added safety, zip-wheel provides premium performance while resisting twisting and bending. This allows for a true, straight cut every time. The end result is a wheel that improves worker safety while delivering the lowest cost-per-cut in the industry.
• Abrasive: Aluminm Oxide
• Workpiece Materials: Steel, Cast Iron, Stainless Steel, Sheet Metal
• Diameter: 4 1/2 Inches
• Thickness: 3/64 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Depressed Center
• Max RPM: 13,300