Abrasives
Showing all 11 results
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Alumina Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: .035 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 25,000
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 42514 Quick Change Disc
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Aluminum Oxide A:
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
Pferd 3″ COMBIDISC Non-Woven Disc Type CDR Hard Type
Pferd 3″ COMBIDISC Non-Woven Disc Type CDR Hard Type
Pferd 43245 COMBIDISC® Non-Woven Discs – Surface Conditioning Discs – Hard Type – Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
Universally suitable for surface conditioning, contour grinding, and cleaning of metals or painted surfaces.
Universally suitable for surface conditioning of metals, e.g., removal of prefinishing marks or oxidation, or light deburring jobs. The flexibility of these discs in surface grinding is determined by the hardness of the holder.
Surface Conditioning Discs – Hard Type:
Universally suitable for surface conditioning of metals, e.g., removal of prefinishing marks or oxidation, or light deburring jobs.
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62288 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 7 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 8,600
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
|
Diameter: |
7″ |
Pferd 3″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 3″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45208 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 3 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 20,000
▪ Recommended RPM: 4,800
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 42520 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 120
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 42518 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 80
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 42517 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 60
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ X 1/16″ Die Grinder Wheel 3/8″Ah 36 Grit – Type 1
Pferd 3″ X 1/16″ Die Grinder Wheel 3/8″Ah 36 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: 1/16 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 25,000
Pferd 7″ X .045 Cut-off Wheel, 7/8″Ah – Type 27
Pferd 7″ X .045 Cut-off Wheel, 7/8″Ah – Type 27
Pferd 63175 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 7 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Depressed Center
• Max RPM: 8,600