Abrasives
Showing 1–20 of 99 results
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Fox Fire Abrasive Disc Conditioner
Fox Fire Abrasive Disc Conditioner
FOXFIRE Abrasive Conditioner
FOXFIRE™ is a revolutionary new grinding lubricant formulated to dramatically extend the life of abrasives and make grinding easier. FOXFIRE™ is a white, extra dry solid that is very clean to use. When applied to an abrasive surface, friction from grinding causes the FOXFIRE™ coating to melt, liquefy and act as a lubricant and release agent. Materials being ground do not load or clog cutting surfaces so abrasives run cooler and last longer. Unlike beeswax or petroleum based products, FOXFIRE™ is not sticky and parts can be blown clean.
FOXFIRE™ works best for grinding aluminum or plastic, removing automotive paint, or any other material that can melt into or clog abrasive surfaces. Discs or belts treated with FOXFIRE™ last longer… up to twenty times longer when grinding aluminum. Abrasive wheel cut off blades treated with FOXFIRE™ cut aluminum like butter without build-up on the cutting wheel. FOXFIRE™ also extends the life of abrasives used to grind stainless steel and carbon steel and leaves no residue that can affect welds made after grinding. In addition, FOXFIRE™ works well on saw blades, taps, drill bits and many other applications where a lubricant or release agent is needed or liquid coolant cannot be used.
Benefits:
▪ FOXFIRE™ increases productivity
▪ Non-toxic and safe
▪ Abrasives stay sharp much longer and cut faster
▪ Time once spent changing discs or belts can be used for grinding
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasives Max4540ZGQ Greenback Flap Disc
The Pearl Abrasives Greenback Zirconia Flap Disc features a fiberglass reinforce disc providing more strength and durability. The exclusive outer coating makes the disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material. The Greenback’s nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down, exposing more flap length.
Specifications:
▪ Abrasive: Zirconia
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Blending, Deburring, Surface Grinding
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 13,300
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
DeWalt DW8021R3 High Speed Cutting Wheel
The DeWalt High Speed Cutting Wheels are made with high-performance aluminum oxide grain that offers increased life and superior material removal, DEWALT Type 1 HP Metal Cutting High Speed Wheels feature 2 full sheets of thick fiberglass for strength and safety. A high grain concentration enables aggressive cutting action and smooth-running wheels.
Specifications:
▪ Arbor: 20
▪ Diameter: 14
▪ Grain: Aluminum Oxide
▪ Application: Ductile Pipe
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 67212 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
• Abrasive: Zirconia Alumina Z
• Workpiece Materials: Steel, Stainless Steel
• Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
• Diameter: 4 1/2 Inches
• Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Curve
• Max RPM: 13,300
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt DW3983 Bi-Metal Portable Band Saw Blade
The DeWalt Bi-Metal Portable Bandsaw Blades are packed with a Matrix II High-Speed Steel Edge, 8% cobalt content, and Rc 65-67 tooth hardness, DEWALT Bi-Metal Portable Bandsaw Blades can stand up to extreme heat and wear. An alloy steel backer resists fatigue.
Specifications:
▪ Length: 44 7/8 Inches
▪ Teeth Per Inch: 18
▪ Thickness: .02
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 64502 Chopsaw Wheel
The Pferd Performance Line SG – Elastic chop saw wheels feature premium aluminum oxide grain and a strong center reinforcement layer for fast, free cutting action and long service life. These wheel provide excellent cutting results on machines with up to 5 horsepower output.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material., rebar, tubing, and other small cross sections
• Diameter: 14 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 1” A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 4,400
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Alumina Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: .035 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 25,000
Lenox 6″ (152mm) 18TPI T2 Bi-metal Reciprocating Saw Blade
Lenox 6″ (152mm) 18TPI T2 Bi-metal Reciprocating Saw Blade
Pferd 4″ 5/8-11 Thd .014 Carbon Steel Wire Standard Twist knot
Pferd 4″ 5/8-11 Thd .014 Carbon Steel Wire Standard Twist knot
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
|
Diameter: |
1″ |
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 67192 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Curve
▪ Max RPM: 13,300
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63103 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
▪ Abrasive: Aluminum Oxide
▪ Workpiece Materials: Steel, Cast Iron
▪ Application: Cutting of sections and solid material
▪ Diameter: 4 1/2 Inches
▪ Thickness: 3/32 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 46
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 4″ .014 Stainless Steel Wire twist knot wheel
Pferd 4″ .014 Stainless Steel Wire twist knot wheel
Threaded Wheel Brushes – Standard Twist Knot Wheel
Standard twist knot wheel brushes with a threaded nut for easy change out. Features loosely twisted knots for aggressive brushing action with a good surface finish. They are ideal when heavy-duty or severe cleaning is required.
For optimal performance use on angle grinders.
Specifications:
|
Diameter: |
4″ |