Abrasives
Showing all 14 results
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weiler Stainless Steel Small Hand Wire Brush
Weiler Stainless Steel Small Hand Wire Brush
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
PFE 31062 Mounted Point
Hardness grade R mounted points are made of grey silicon carbide in a vitrified bond. These products are noted for their hardness and durability.
Advantages:
▪ Hardness grade R tools are ideally suited for heavy-duty edge grinding on castings. They are distinguished by their high edge-holding capability, long service life and low wear.
▪ Due to their special edge-holding properties, hardness grade R mounted points can also be used economically with low RPM power tools.
▪ In edge grinding operations, hardness grade R mounted points perform best at a recommended peripheral speed of 6,000 – 9,800 SFPM. For surface grinding we recommend a peripheral speed of 4,000 – 6,000 SFPM. Suitable drive systems include flexible shafts and electric or air-powered straight grinders.
Specifications:
▪ Shape: A11
▪ Diameter: 7/8”
▪ Length: 2”
▪ Shank Diameter: ¼”
▪ Grit: 30
▪ Max RPM: 19,860
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
Diameter: |
1″ |
Weldmark Brush Scratch SS Curved Handle 3″ X 19″
Weldmark Brush Scratch SS Curved Handle 3″ X 19″
Weldmark Stainless Steel Wire Curved Handle Scratch 3X19 Brush
These are excellent industrial brushes for heavy duty cleaning purposes.
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Pferd 1″ .014 Stainless Steel Wire Stem Mounted End Brush
Pferd 1″ .014 Stainless Steel Wire Stem Mounted End Brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
Diameter: |
1″ |
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America SB-5DC Carbide Burr
Drill America 1/2” X 1” Cylindrical End Cut Carbide Burr 1/4 Shank
Specifications:
▪ Size: 1/2”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 1”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Cylindrical, End-Cut Double Cut
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America cylindrical end cut carbide bur ¼”
Pferd 3 1/2″ .014 Knot Cup Brush Carbon Steel Standard Twist
Pferd 3 1/2″ .014 Knot Cup Brush Carbon Steel Standard Twist
Knot Cup Brushes – External Nut, Single Row – Standard Twist – Carbon Steel
For use on large surfaces where a great deal of roughing is required. Good for corners and angles and removal of contaminants such as scale, concrete, slag or marine growth.
Recommended for suitable drive systems: stationary machines and angle grinders. When using angle grinders, please observe permitted RPM limit of the brush.
Specifications:
Diameter: | 3-1/2″ |
Weiler 1/2″ .014 Steel Crimped Wire End Brush
Weiler 1/2″ .014 Steel Crimped Wire End Brush
Drill America 3/8″ X 3/4″ Tree Pointed End Carbide Burr
Drill America 3/8″ X 3/4″ Tree Pointed End Carbide Burr
Drill America SG-3DC Carbide Burr
Drill America 3/8” X 3/4” Tree Pointed End Carbide Burr 1/4 Shank
Specifications:
▪ Size: 3/8”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 3/4”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Tree, Pointed-End Double Cut