Abrasives
Showing 1–20 of 23 results
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 42514 Quick Change Disc
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Aluminum Oxide A:
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 08-B 462 HP Combo Wheel
The Walter high performance all in one cutting and grinding 1/8” wheels set new standards for performance in combined depressed center wheels (for portable angle grinders). They are specially reinforced to withstand the stress in off-hand cutting operations. Whether cutting, grooving, notching or light grinding, these wheels are guaranteed to give you the longest wheel life, fastest material removal and maximum safety.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting, Grooving, Notching or Light Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inch
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63405 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63404 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/8
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 9″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61564 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61562 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61555 Grinding Wheel
The PFERD Performance Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 4-1/2″ CC Grind Solid 7/8″Ah
Pferd 4-1/2″ CC Grind Solid 7/8″Ah
Pferd 61200 CC-Grind Solid Grinding Disc
The PFERD CC-Grind Solid grinding discs are high performance discs with extremely high removal rates combined with long service life and high user comfort. The innovative high-strength layer structure of the fiberglass backer guarantees the same touch and safe use as a with a grinding wheel while still meeting all safety requirements for grinding wheels according to the ANSI B7.1 and EN 12413 Standards. Only use CC-Grind Solid discs with the face of the disc. They are not suitable for circumferential grinding.
Specifications:
▪ Abrasive: Coated Ceramic
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Blending
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Max RPM: 13,300
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 30 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 30 Grit – Type 27
Pferd 61107 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels achieve fast removal rates and a smooth, aggressive grinding action with minimal contact pressure on stainless steel and high temperature alloys. The premium grains provide an extended service life. These wheels achieve optimal grinding results on high powered angle grinders.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Stainless Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 30
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 30 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 30 Grit – Type 27
Pferd 61105 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels achieve fast removal rates and a smooth, aggressive grinding action with minimal contact pressure on stainless steel and high temperature alloys. The premium grains provide an extended service life. These wheels achieve optimal grinding results on high powered angle grinders.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Stainless Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/8
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 30
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 5″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 5″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61003 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 5 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Centre
▪ Max RPM: 12,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61002 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Centre
▪ Max RPM: 12,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61001 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
· 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure
· PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes
· Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling
· Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys
3M™ Cubitron© II Fibre Disc 987C offers significant gains in productivity on medium to heavy-duty operations with our exceptionally high-performing 3M Precision Shaped Grain combined with a stiff fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other fiber discs””all with less grinding pressure.
3M™ Cubitron© II Fibre Disc 987C is suitable for use on almost all metals and excels in stainless steel and other nickel alloy applications. It is ideal for weld removal, beveling, removing mill scale, pits and imperfections, and more. Because 3M Precision Shaped Grain generates an exceptionally high cut-rate with less pressure, operators can finish tough tasks faster and with less fatigue. A grinding aid incorporated on the disc makes this an outstanding product for all types of metal””it helps keep the disc cooler on stainless steel and heat-sensitive metals such as nickel alloys and titanium, thereby reducing metal discoloration/oxidation and the chance of heat-related stress cracks. Moreover, because the abrasive itself stays cooler and sharper, our 3M Precision Shaped Grain discs last significantly longer than conventional ceramic grain discs, delivering a lower cost per grind with fewer disc changes.
Our 3M™ Cubitron© II products have raised the bar for high-performing abrasives. 3M Precision Shaped Grain outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.
To create 3M Precision Shaped Grain, our engineers started with 3M™ Ceramic Abrasive Grain and used proprietary technology to form the grains into triangular structures and electrostatically orient them on the backing to form sharp peaks that maximize cutting potential. These peaks slice cleanly through metal, rather than gouging or plowing as traditional abrasives do, and continuously self-sharpen as the points break off. This generates a super-fast cut and lessens heat build-up due to friction, reducing heat-related stress cracks and discoloration.
3M Precision Shaped Grain also wears evenly, and because the abrasive itself stays cooler and sharper, 3M™ Cubitron© II products last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications.
Fiber discs are heavy-duty discs ideal for weld removal, grinding, and blending large and small areas of metal surfaces. They feature a tough, stiff backing made from vulcanized fiber that resist wear and can handle tough grinding applications.
| Specifications | |
| Abrasive Material | Precision Shaped Ceramic Grain |
| Abrasive Trade Name | Cubitron II |
| Applicable Materials | Cobalt & Nickel Alloy, Stainless Steel, Titanium |
| Applications | Grinding; Metal Stock Removal |
| Body Material | Fiber |
| Bond | Resin |
| Brand | 3M ABRASIVE |
| Color | Orange |
| Dia. [Nom] | 4 1/2 in |
| Grit | 60 |
| Mounting | Threaded Hole |
| Speed [Max] | 13,300 rpm |
| Style | 987C |
| Type | Fibre Disc |
| Used With | Right Angle Grinder |
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
|
Diameter: |
7″ |
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
| Diameter: | 4-1/2″ |
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Aluminum Oxide A – 5″ Diameter Disc