Finishing
Showing all 4 results
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
Mini flap discs, particularly useful for weld dressing in hard-to-reach areas. These tools excel in performance when compared to plain coated abrasive discs in terms of service life and grinding performance.
Pferd 1-1/2″ X 1″ Quick Change Flap Wheel 60 Grit
Pferd 1-1/2″ X 1″ Quick Change Flap Wheel 60 Grit
Quick Change Flap Wheels – Aluminum Oxide A
This flap wheel spins on and off without tools. Unique design prevents shaft from pulling out of core while maintaining perfect balance at operating speed. Each package contains 1 shank adapter with 1/4-20 thread.
Specifications:
|
Diameter: |
1-1/2″ |
Pferd 3″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 3″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45208 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 3 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 20,000
▪ Recommended RPM: 4,800
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45184 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 1 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 25,000
▪ Recommended RPM: 15,000