Gas
Showing all 12 results
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark by Victor Purging Regulator
Weldmark by Victor single-stage purging regulator features a durable forged brass body and cap with a high delivery pressure. They also feature easy-to-read gauges, and a stem-type seat mechanism for accurate gas flow.
Primarily used by HVAC professionals for nitrogen purging. May be used with helium, argon, co2 or any other inert gas.
Specifications:
- Gas Service: Inert Gas
- CGA: 580
- Outlet Connection: ¼”-37
- Delivery Pressure: 500 psig
- Max Inlet Pressure: 3000 psig
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor Regulator Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Gas Cylinder Wall Bracket
Gas Cylinder Wall Bracket
The Cylinder Wall Bracket made of cast aluminum, it can support cylinders up to 14″ OD. The 1 inch wide by 54″ long nylon strap has a nickel-plated, steel, nonslip spring catch and buckle for fast adjustment. Recessed mounting holes are located in each end of the bracket for mounting to a wall, or any vertical surface.
Weldmark 2″ Brass Replacement Gauge 4000 PSI
Weldmark 2″ Brass Replacement Gauge 4000 PSI
Weldmark 2” pressure gauge
Specifications:
- Diameter: 2”
- Thread: ¼”
- Measuring Range: 4,000 lbs.
- Material: Brass
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote brand Twin Welding hose ¼ x 50ft T grade hose for all fuel types. B size fittings.
Specifications:
- Connection Type: BB
- Gas Type: All Fuel Gases
- Grade: T
- Hose I.D. [Nom] ¼”
- Hose O.D. [Nom] 3/8”
- Length [Nom] 50FT
- Material: Synthetic Rubber
- Operating Temp. [Min] -40 °F
- Operating Temp. [Max] 212 °F
- Pressure [Max] 200 PSI
- Thread Direction: Oxygen RH/ Acetylene LH
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor Torch Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Weldmark Balloon Inflator Regulator w/Handtight Nut/Gauge/Cutter/Hook
Weldmark Balloon Inflator Regulator w/Handtight Nut/Gauge/Cutter/Hook
Weldmark Balloon Inflator & Regulator
Weldmark balloon filling inflator and regulator for use with helium tanks to fill latex balloons. Easy to use, hand tighten to tank value then place balloon opening onto inflator nozzle and press the inflator down to release the gas into the balloon.
Features:
· Regulator with Full Size Hand-Tightening feature
· Easy to Read Pressure Gauge
· Durable Brass Fittings
· Fits all CGA-580 Tank Valves (the typical Helium, Argon, and Nitrogen valve on most tanks)
ESAB Nozzle Nut for C-57/C-57R Cutting Torch
ESAB Nozzle Nut for C-57/C-57R Cutting Torch
ESAB Purox 4202 Size 1/2 One Piece Acetylene Medium Preheat Cutting Tip
ESAB Purox 4202 Size 1/2 One Piece Acetylene Medium Preheat Cutting Tip
ESAB 16K09 Purox 4202 Series Cutting Tip
4202 Series General Purpose Acetylene cutting tip for Metal Thicknesses of ½ inch material.
Used with CW-200, CW-250 and CW-300 Cutting attachments.
ESAB Purox 4202 Size 1 1/2 One Piece Acetylene Medium Preheat Cutting Tip
ESAB Purox 4202 Size 1 1/2 One Piece Acetylene Medium Preheat Cutting Tip
ESAB 16K10 Purox 4202 Series Cutting Tip
4202 Series General purpose Acetylene cutting tip for Metal Thicknesses of 3/4-1-1/2 material.
Used with CW-200, CW-250 and CW-300 Cutting attachments.
Weldmark 3/16″ X 12′ AA R Grade Acetylene
Weldmark 3/16″ X 12′ AA R Grade Acetylene
Weldmark Single line Red 3/16” x 12’ AA R Grade Acetylene hose
Specifications:
- Connection Type: A size fitting
- Gas Type: Acetylene
- Length: 12ft
- Pressure [Max 200 psi