Welding
Showing 1–20 of 25 results
Rod Guard Polyethylene Blue Canister for 18″ – 36″ Electrode
Rod Guard Polyethylene Blue Canister for 18″ – 36″ Electrode
Rod Guard® Cannisters & Accessories provide great storage and inventory control for all your welding electrodes, rods and filler metals. And every one of them is made in America – and built to last.
Each Rod Guard® Cannister is certified chloride-free and features a threaded cap with long-lasting neoprene seal to keep electrodes airtight – preventing them from being contaminated with atmospheric moisture.
Because Rod Guard® Cannisters are constructed of high-impact polyethylene – which protect electrodes from damage – they can be reused for many years.
Can withstand up to 225° F and hold up to 36″
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Western Hose Repair Kit
Western Hose Repair Kit
Western Enterprises Hose Repair Kits
Convenient plastic case is durable and includes a full color label and description chart
Western® hose repair kit offers 12 different items most frequently used for hose repair.
Included are hose nuts and nipples, splicers, couplers, ferrules and a choice of crimping tool.
Convenient plastic case is durable and includes a full color label and description chart
For 1/4 Inch I.D. hose, B-Size fittings only
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco HD22 Series 200 Amp brass gas diffuser for 200amp air-cooled MIG Guns
Tweco 300 Amp Copper Ground Clamp
Tweco 300 Amp Copper Ground Clamp
Genuine Tweco® Professional Copper Ground Clamp with Ball-Point Cable Connection
Features
· Copper cast upper and lower jaws
· Insulated Spring
· Heavy Duty Spring providing the clamping force to the work surface
Specifications
· Material Composition: Copper Casting
· Amperage Capacity: 300
· Jaw Opening Depth: 4″
· Applications: Light Duty Metal Fabrication
· Overall Length: 8.5″
· Type Of Cable Connection: Ball-Point thru 3/0
· Style: Ground Device Clamp
· Jaw Opening: 1.5″
· Processes: SMAW, SAW, GMAW, FCAW, GTAW
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
3/32” X 7” Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated.
These electrodes have excellent arc starting, a low burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
- AWS A5.12 EWLa-1.5
- ISO 6848 WL15
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD 22 Series Air Cooled Nozzles for Classic No. 2, Spray Master 250, and Smoke Master 250 MIG guns are self insulated and compatible with HD52 Series Gas Diffusers.
Compatible with Tweco MIG guns:
- Classic No. 2
- Spray master 250
- Smoke Master 250
Features:
- Used in heavy duty welding application up to 250 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allows and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- 3-piece design – does not require an additional insulator
Specifications:
- Inside Diameter: 1/2″
- Style: Slip-On
- Nozzle/Contact Tip Relationship: 1/8″ – 5/32″ Tip recess
- Outside Diameter: .875″
Tweco .035 Velocity Contact Tip
Tweco .035 Velocity Contact Tip
Tweco Model VTS-35 .035” Velocity Series Contact Tip
Compatible with Tweco Fusion Series MIG Guns
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
This Hotspotter is an all-purpose propane flame tool that operates off the pressure of a standard propane tank-no regulator required. Ergonomic handle with adjustable trigger. Hooks up to standard 20 lb. Propane tank. Operates with no smoke and no fumes.
Appropriate for a wide variety of all-season maintenance/repair applications at commercial offices, factories, institutions, warehouses, parks, residential properties, farms, and parking lots.
Some uses include:
▪ Burn weeds
▪ Repair asphalt
▪ Seal tar
▪ Peel paint
▪ Remove road markings
▪ Melt ice
▪ Thaw pipes
Features and Specifications:
▪ Delivers up to 550,000 BTU
▪ Durable 10 ft. neoprene hose
▪ Accurate brass flow control shut-off valve
▪ Brass propane tank adaptor
▪ Spark ignitor
▪ Durable cast iron and steel nozzle (WB-101)
▪ Welded tube nozzle (WB-100 & WB-102)
▪ 31″ Heavy-Duty Handle
▪ Meets NFPA 51 specifications
▪ Excess Flow Valve
▪ One year warranty
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
CK Worldwide FX TIG Torch Pkg 130A Flex, 25′ 1pc SuperFlex
CK Worldwide FX TIG Torch Pkg 130A Flex, 25′ 1pc SuperFlex
CK 130 Air-Cooled SuperFlex TIG Torch Package
130 Amp Air-Cooled 2-series TIG Torch from CK Worldwide.
What’s Included:
· CK130 TIG Torch with Flex Head
· 1 piece of cable 25′
Western Brass Quick Connect Torch to Hose Oxygen/Fuel Gas Set w Check Valves
Western Brass Quick Connect Torch to Hose Oxygen/Fuel Gas Set w Check Valves
Westerns Brass torch to hose set quick disconnect.
Western’s Quick-Connects provides for fast, reliable, and positive connections and quick disconnect for torches, hoses and regulators.
All models are color-coded for gas service for added safety (Oxygen/Green, Fuel Gases/Red, and Inert Gases/Blue). Oxy/Fuel Gas models included integral reverse flow Check Valve.
Quick Connects fit all B-Size welding and cutting equipment
Western “B” Size Valved “Y” Connections, 200 PSIG, Brass, Male/Female, RH, 5/8″ – 18 for Inert Gas
Western “B” Size Valved “Y” Connections, 200 PSIG, Brass, Male/Female, RH, 5/8″ – 18 for Inert Gas
Western 411 Brass Y Connector with Valve
· Connection: CGA: 032
· 5/8-18 RH Female x 5/8-18 RH Male
· Number of Outlets: 2
· Operating Pressure: 200 psig
· Gas Service: Inert
Features
· One piece connections with brass body valves
· Precision shut off valves
· For use of two cutting and/or welding torches at once
Western Inert Gas Arc Hose Couplers, Brass, C-Size, Female/Female, RH to RH
Western Inert Gas Arc Hose Couplers, Brass, C-Size, Female/Female, RH to RH
Western Inert Arc Hose Coupler
Made from brass to ensure functionality and durability
Can accommodate up to 200 psi of pressure
· Material: Brass
· C-Size Fittings
· Connection Type: Female/Female
· Connections: CGA-034 to C Size
· Thread direction: RH to RH
Western Inert Gas Coupler – “B” Size Female-to-Female
Western Inert Gas Coupler – “B” Size Female-to-Female
Western Inert Arc Hose Coupler
Made from brass to ensure functionality and durability
Can accommodate up to 200 psi of pressure
· Material: Brass
· B-Size Fittings
· Connection Type: Female/Female
· Connections: CGA-032 to B Size (5/8 in-18)
· Thread direction: RH to RH
Tweco .035 11H Series Contact Tip For 160 – 250A No. 1, Mini-MIG-Gun And Spray Master Series MIG Guns
Tweco .035 11H Series Contact Tip For 160 – 250A No. 1, Mini-MIG-Gun And Spray Master Series MIG Guns
Tweco Model 11H-35 .035” 11H Series Heavy Duty Contact Tip
Compatible with Tweco MIG Guns:
▪ Professional #1
▪ Mini-MIG
▪ Spray Master Series