Welding
Showing all 19 results
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard Model N1C58HQ Quik series 1 with 5/8″ bore, heavy duty, plated copper; threaded nozzle
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Bernard Universal Liner 1/16″ X 15′
Bernard Universal Liner 1/16″ X 15′
Compatible with MIG Guns:
▪ Legacy Q
▪ Legacy S
▪ Legacy T
▪ BTB MIG
▪ TGX Series
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 5/8″ Centerfire Small Nozzle
Bernard 5/8″ Centerfire Small Nozzle
Bernard Model NS-5818C Centerfire series 5/8″ Bore, 1/8″ Recess, .875″ O.D, Copper small nozzle.
For use with Bernard Centerfire DS-1 small gas diffuser.
Nozzle is compatible with Bernard MIG Gun series:
▪ BTB series
▪ Clean Air Series
▪ Dura-Flex
▪ Fixed Liner Series
▪ FILTAIR Fume Extraction series
▪ Legacy Q-Gun series
▪ Legacy S-Gun series
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Bernard .035″ Centerfire T Series Contact Tip
Bernard .035″ Centerfire T Series Contact Tip
Bernard T-035 .035” x 1.5” Centerfire T Series Contact Tip.
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
3/32” X 7” Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated.
These electrodes have excellent arc starting, a low burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
- AWS A5.12 EWLa-1.5
- ISO 6848 WL15
Bernard Centerfire .052 X 1.5″ T Series Contact Tip
Bernard Centerfire .052 X 1.5″ T Series Contact Tip
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard Model N1C12Q Quik Tip series 1 with 1/2″ bore, plated copper; threaded nozzle.
Nozzle is compatible with:
BTB series
Clean Air Series
Dura-Flex
Fixed Liner Series
FILTAIR Fume Extraction series
Legacy Q-Gun series
Legacy S-Gun series
Bernard Centerfire Water-Cooled Gas Diffuser
Bernard Centerfire Water-Cooled Gas Diffuser
Bernard Brand, Model DW-1 Centerfire Water-Cooler Gas Diffuser/Tip Adapter. Price reflects minimum order of 10
Compatible with:
▪ Bernard™ W-Gun
Bernard Centerfire Small Gas Diffuser
Bernard Centerfire Small Gas Diffuser
Bernard Brand, Model DS-1 CenterFire Small Gas Diffuser/Tip Adapter.
Compatible with:
▪ BTB Series MIG Guns
▪ Clean Air Series
▪ Dura-Flux Fixed Liner Series
▪ FILTAIR Fume Extraction Series
▪ Legacy Q-Gun
▪ S-Gun Series
CK Worldwide FX TIG Torch Pkg 130A Flex, 25′ 1pc SuperFlex
CK Worldwide FX TIG Torch Pkg 130A Flex, 25′ 1pc SuperFlex
CK 130 Air-Cooled SuperFlex TIG Torch Package
130 Amp Air-Cooled 2-series TIG Torch from CK Worldwide.
What’s Included:
· CK130 TIG Torch with Flex Head
· 1 piece of cable 25′
Bernard 5/8″ Bore 1/8″ Recess Centerfire Series Large Nozzle
Bernard 5/8″ Bore 1/8″ Recess Centerfire Series Large Nozzle
Bernard Model N-5818C Centerfire series 5/8″ bore, 1/8 recess, copper large nozzle. For use with Bernard D-1 gas diffuser, 4423R insulator, and “T” & “TT” series contact tips.
Nozzle is compatible with:
BTB series
Clean Air Series
Dura-Flex
Fixed Liner Series
FILTAIR Fume Extraction series
Legacy Q-Gun series
Legacy S-Gun series
Bernard 5/8″ Bore 1/4″ Recess Centerfire Series Nozzle
Bernard 5/8″ Bore 1/4″ Recess Centerfire Series Nozzle
Bernard Model N-5814C Centerfire series 1/4” recess, 5/8” welding nozzle
Nozzle is compatible with:
▪ BTB series
▪ Clean Air Series
▪ Dura-Flex
▪ Fixed Liner Series
▪ FILTAIR Fume Extraction series
▪ Legacy Q-Gun series
▪ Legacy S-Gun series
Bernard Centerfire .045 X 1.5″ T Series Contact Tip
Bernard Centerfire .045 X 1.5″ T Series Contact Tip
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Bernard Centerfire Large Gas Diffuser
Bernard Centerfire Large Gas Diffuser
Bernard Brand, Model D-1 CenterFire Large Gas Diffuser/Tip Adapter.
Compatible with:
▪ BTB Series MIG Guns
▪ Clean Air Series
▪ Dura-Flux Fixed Liner Series
▪ FILTAIR Fume Extraction Series
▪ Legacy Q-Gun
▪ S-Gun Series