Welding
Showing 1–20 of 50 results
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Self-Insulated MIG Gun Nozzles, 1/2 in Bore, 1/8 in Recess
Compatible with MIG Guns:
· Tweco 135Amp Mini
· Tweco No. 1
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
3/32” X 7” Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated.
These electrodes have excellent arc starting, a low burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
- AWS A5.12 EWLa-1.5
- ISO 6848 WL15
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 14-30 .030” 14 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #2
▪ Professional #3
▪ Professional #4
▪ Spray Master Series MIG Guns
Best Welds .035 Miller Style Contact Tip
Best Welds .035 Miller Style Contact Tip
Best Welds, Miller Model 000068 .035”, Replacement Contact Tip.
Replacement tip designed for .035 inch (0.8 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Best Welds .030 Miller Style Contact Tip
Best Welds .030 Miller Style Contact Tip
Best Welds, Miller Model 000067 .030” Replacement Contact Tip.
Replacement tip designed for .030 inch (0.9 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Best Welds .030-.035 Tweco Conduit
Best Welds .030-.035 Tweco Conduit
Best Welds Tweco Model 42-30-35-15 .030” – .035” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #1
▪ Professional #2
Best Welds 125 Amp Air Cooled TIG Torch Flex w/Valve Head
Best Welds 125 Amp Air Cooled TIG Torch Flex w/Valve Head
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds 21-62 Self-Insulated MIG Gun Nozzles
Best Welds Tweco style 21 Series 5/8” self-insulated MIG gun nozzles with 1/8” recess.
- Used in light to medium duty welding application up to 180 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut and Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allow and machining the internal threads to match the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- Tapered nozzle 3-piece design – does not require an additional insulator
- Nozzle threads onto the gas diffuser
Nozzle is compatible with:
▪ Tweco Mini
▪ Tweco No 1
▪ Best Welds 135
Best Welds .035 11 Series Tweco Style Standard Duty Contact Tip
Best Welds .035 11 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 11-35 .035” 11 Series Standard Duty Contact Tip.
Compatible with Tweco Professional #1, and Spray Master Series MIG Guns
Best Welds .035-.045 Tweco Conduit
Best Welds .035-.045 Tweco Conduit
Best Welds Tweco Model 44-3545-15 .035” – .045” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #3
▪ Professional #4
Best Welds Tweco 52 Gas Diffuser For 200A No. 2 Series MIG Guns
Best Welds Tweco 52 Gas Diffuser For 200A No. 2 Series MIG Guns
Best Welds, Tweco Model 52 Gas Diffuser/Tip Adapter.
Compatible with Tweco Professional #2 MIG gun