Welding
Showing 1–20 of 21 results
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Lincoln Excalibur 8018-B2 MR
Lincoln Excalibur 8018-B2 MR
Top Features
- Designed for welding 1.25% chromium, 0.50% molybdenum steel
- Premium arc performance
- Square coating burn-off
- Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength after 8 hours of stress-relieving at 690°C (1275°F)
Typical Applications
- Power generation
- Petrochemical
- Pressure vessels
- Process piping
Welding Positions
All, except vertical down
ESAB Atom Arc 7018 Low Hydrogen Stick Electrode
ESAB Atom Arc 7018 Low Hydrogen Stick Electrode
Lincoln Fleetweld 5P+ Mild Steel Cellulosic Stick Electrode
Lincoln Fleetweld 5P+ Mild Steel Cellulosic Stick Electrode
Hobart Deckmaster E6022 Mild Steel Stick Electrode
Hobart Deckmaster E6022 Mild Steel Stick Electrode
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
Stoody 19 Hard Facing Electrode
Stoody 19 Hard Facing Electrode
Lincoln Pipeliner Arc 80 Stick Electrode
Lincoln Pipeliner Arc 80 Stick Electrode
Lincoln Shield-Arc HYP+ Low Alloy Stick Electrode
Lincoln Shield-Arc HYP+ Low Alloy Stick Electrode
Lincoln Excalibur 7018 MR Low Hydrogen Mild Steel Stick Electrode
Lincoln Excalibur 7018 MR Low Hydrogen Mild Steel Stick Electrode
Hobart 24 E7024 Mild Steel Stick Electrode
Hobart 24 E7024 Mild Steel Stick Electrode
J. W. Harris E70S-2 Steel TIG Rod 10# box
J. W. Harris E70S-2 Steel TIG Rod 10# box
LINCOLN SHIELD-ARC 85
LINCOLN SHIELD-ARC 85
Top Features
- For welding 0.50% molybdenum steel
- Light slag with minimal arc interference
- Deep penetration and superior puddle control
- Clean, visible weld puddle
- Capable of 480 MPa (70 ksi) tensile strength weld deposits
Typical Applications
- API 5L X42 through X56 grade pipe
- Cross country and in-plant pipe
Welding Positions
All
Anchor Miller Style .023 Standard Duty Contact Tip
Anchor Miller Style .023 Standard Duty Contact Tip
Replacement tip designed for .023 inch (0.9 mm) solid or flux-cored welding wires.
For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Lincoln Shield-Arc 70+ Low Alloy Stick Electrode
Lincoln Shield-Arc 70+ Low Alloy Stick Electrode
Hobart 418 E7018-1 H4R Low Hydrogen Stick Electrode
Hobart 418 E7018-1 H4R Low Hydrogen Stick Electrode
Weldmark Arcair Pointed Copperclad DC Carbon Arc Gouging Electrode 5/32″ X 12″ 50per box
Weldmark Arcair Pointed Copperclad DC Carbon Arc Gouging Electrode 5/32″ X 12″ 50per box
Weldmark Brand, Model #WM22-983-003, Arcair DC Pointed Copperclad arc gouging electrode features a blend of carbon and graphite and offers good metal removal rates.
Great for any Light-Duty Maintenance, Farming, and Repair Shops.
Applications:
▪ Creating u-grooves in the weld
▪ Removing old welds
▪ Gouging out cracks
▪ Cleaning and repairing castings, and more
Specifications:
Diameter: | 5/32′ |
Length: | 12″ |
Package Size: | 50 Electrodes per Box |
Best Welds .023 14 Series Tweco Style Standard Duty Contact Tip
Best Welds .023 14 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 14-23 .023” 14 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #2
▪ Professional #3
▪ Professional #4
▪ Spray Master Series MIG Guns