Welding
Showing 1–20 of 60 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 TIG Rod
Weldmark is a premium carbon steel multiple deoxidized wire. Produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2
Weldmark ER4043 Aluminum TIG Rod 1# tube
Weldmark ER4043 Aluminum TIG Rod 1# tube
4043 is a general purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloy contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. ER4043 can be used to weld various grades of aluminum.
AWS Class: ER4043 | Certification: AWS A5.10/ A5.10M:1999 |
Alloy: ER4043 | AWS/ASME SFA A5.10 |
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
The Harris Stay-Silv 15 PhosCopper Brazing Alloy is the industry standard for air conditioning and refrigeration applications. Still widely used, but now often replaced by Dynaflow® in many HVAC/R applications. For many years the standard of the industry, the 15% silver alloy has proven its value. This filler metal is excellent for situations in which close fit-up does not exist, and where thermal expansion and service vibration are involved.
Specifications:
Diameter | 1/8″ |
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030” – .035’” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Roughneck
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Blue Demon Silicon Bronze TIG Welding Rod
Blue Demon Silicon Bronze TIG Welding Rod
Blue Demon Copper & Copper Alloy TIG Welding Rod has excellent welding properties and can be used on various applications.
ERCuSi-A
This silicon bronze (ERCuSi-A) rod is primarily used for MIG, TIG, and gas welding of copper, copper-silicon and copper-zinc base metals to themselves and to steel. It is an excellent choice for joining plain or galvanized sheet metal, as well as other coated steels. 1866° F melting point.
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Blue Demon Flux Coated Brazing Bronze 1# Tube
Blue Demon Flux Coated Brazing Bronze 1# Tube
Blue Demon flux coated brazing bronze is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Preheating is recommended for some applications. This brazing rod has a low melting point making it easily machinable and excellent for sheet metal work. This alloy also possesses high tensile strength and good ductility.
J. W. Harris 5356 Aluminum TIG Rod 10# box
J. W. Harris 5356 Aluminum TIG Rod 10# box
0535630, 0535660, 0535650
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
Weldmark TIG Collet 1/8″ For HW-20, 9, 25 Torches
Weldmark TIG Collet 1/8″ For HW-20, 9, 25 Torches
ESAB Atom Arc 7018 Low Hydrogen Stick Electrode
ESAB Atom Arc 7018 Low Hydrogen Stick Electrode