Welding
Showing 1–20 of 37 results
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Weldmark TIG Collet 3/32″ For HW-20, 9, 25 Torches
Weldmark TIG Collet 3/32″ For HW-20, 9, 25 Torches
American Torch Tip Electrode, 260A
American Torch Tip Electrode, 260A
Mfr #: 90-0668
Application: Plasma Cutting
Item: Electrode
Country of Origin (subject to change): United States
Miller .035 M5 Contact Tip For Spoolmate 100, 200 And Hobart DP-3035 Series MIG Guns
Miller .035 M5 Contact Tip For Spoolmate 100, 200 And Hobart DP-3035 Series MIG Guns
Miller .035” M5 Series Contact Tip
Compatible with MIG Guns:
▪ Spoolmate 100
▪ Spoolmate 200
▪ Hobart DP-3035
J. W. Harris 5356 Aluminum TIG Rod 10# box
J. W. Harris 5356 Aluminum TIG Rod 10# box
0535630, 0535660, 0535650
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
Weldmark TIG Collet 1/8″ For HW-20, 9, 25 Torches
Weldmark TIG Collet 1/8″ For HW-20, 9, 25 Torches
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco HD22 Series 200 Amp brass gas diffuser for 200amp air-cooled MIG Guns
Weldmark TIG Collet 1/8″ For HW-17, 18, 26 Torches
Weldmark TIG Collet 1/8″ For HW-17, 18, 26 Torches
Weldmark TIG Collet 1/16″ For HW-17, 18, 26 Torches
Weldmark TIG Collet 1/16″ For HW-17, 18, 26 Torches
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
J. W. Harris E70S-2 Steel TIG Rod 10# box
J. W. Harris E70S-2 Steel TIG Rod 10# box
Best Welds Tweco 52 Gas Diffuser For 200A No. 2 Series MIG Guns
Best Welds Tweco 52 Gas Diffuser For 200A No. 2 Series MIG Guns
Best Welds, Tweco Model 52 Gas Diffuser/Tip Adapter.
Compatible with Tweco Professional #2 MIG gun