Welding
Showing all 19 results
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Tungsten Electrode 3/32” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
1/16” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (MSDS) for its use.
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Jokisch Premixed Anti Spatter 1 Gallon Cannister
Jokisch Premixed Anti Spatter 1 Gallon Cannister
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Weldmark 2% Thoriated Tungsten 1/8″ X 7″
Weldmark 2% Thoriated Tungsten 1/8″ X 7″
1/8” X 7” Ground 2% Thoriated Tungsten Electrode
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Miller Millermatic & Diversion Welding Cart
Miller Millermatic & Diversion Welding Cart
Genuine Miller Heavy-Duty Welder cart/cylinder rack has 8” rubber wheels in back and front casters for easy maneuvering. This running gear is perfect for use with Millermatic® 125 Hobby, 141, 190, 211, Multimatic™ 200, 215 and Diversion™ or any TIG, MIG, Plasma machines of similar size. The gas cylinder rack is designed to hold one gas cylinder no larger than 7 in (178 mm) diameter, maximum weight 65 lbs. pounds (80 cubic foot capacity is ideal).
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
3/32” X 7” Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated.
These electrodes have excellent arc starting, a low burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
- AWS A5.12 EWLa-1.5
- ISO 6848 WL15
Metal Man Deluxe Welding Cabinet
Metal Man Deluxe Welding Cabinet
The Metal Man deluxe welding cabinet provides an integrated all-in-one solution for a portable welder or plasma cutter
applications. Designed for equipment to sit on top of cabinet, and a 7 1/2in. gas cylinder configuration, it makes maneuvering a snap. It includes 4 drawers of varying sizes that provide convenient storage for helmet, hammer, brush and other welding accessories, along with hooks that provide easy access to welding cables.
SPECIFICATIONS:
- 150 lbs. capacity
- Dimensions: 28.3” X 17.6” X 33.5”
- Weight: 94 lbs.
- Steel construction with power coat finish
- Ball bearing drawer slides
- 2 locking front casters
- 7” rear wheels
FEATURES:
Weldmark TIG Collet 1/16″ For HW-20, 9, 25 Torches
Weldmark TIG Collet 1/16″ For HW-20, 9, 25 Torches
ShurLite Single-Flint Round Spark Lighter
ShurLite Single-Flint Round Spark Lighter
ESAB Nozzle Nut for C-57/C-57R Cutting Torch
ESAB Nozzle Nut for C-57/C-57R Cutting Torch
Western Brass Quick Connect Torch to Hose Oxygen/Fuel Gas Set w Check Valves
Western Brass Quick Connect Torch to Hose Oxygen/Fuel Gas Set w Check Valves
Westerns Brass torch to hose set quick disconnect.
Western’s Quick-Connects provides for fast, reliable, and positive connections and quick disconnect for torches, hoses and regulators.
All models are color-coded for gas service for added safety (Oxygen/Green, Fuel Gases/Red, and Inert Gases/Blue). Oxy/Fuel Gas models included integral reverse flow Check Valve.
Quick Connects fit all B-Size welding and cutting equipment
Jokisch Anti Spatter Concentrate 1 Gallon Cannister
Jokisch Anti Spatter Concentrate 1 Gallon Cannister
