Welding
Showing 1–20 of 23 results
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0093 40 Amp Drag Tip
Compatible with:
▪ CUTMASTER 42
▪ SL40
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Tungsten Electrode 3/32” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
1/16” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (MSDS) for its use.
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8206, 30 Amp Drag Tip.
Compatible with:
▪ Cutmaster 52
▪ Cutmaster 82
▪ Cutmaster 102
▪ Cutmaster 152
▪ SL60
▪ SL100
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8211, 80 Amp Tip
Compatible with:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Weldmark 2% Thoriated Tungsten 1/8″ X 7″
Weldmark 2% Thoriated Tungsten 1/8″ X 7″
1/8” X 7” Ground 2% Thoriated Tungsten Electrode
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
3/32” X 7” Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated.
These electrodes have excellent arc starting, a low burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
- AWS A5.12 EWLa-1.5
- ISO 6848 WL15
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamic Brand, Model 35-1053 100 Amp Air/Oxygen Tip
Compatible with XT-301 plasma torch.
Cutting Tip, 3-101, 3 Tip Size, Acetylene Gas Service, GPP Tip Type
Cutting Tip, 3-101, 3 Tip Size, Acetylene Gas Service, GPP Tip Type
item: Cutting Tip
Series: 3-101
Tip Size: 3
Gas Service: Acetylene
Tip Type: GPP
Cutting Tip, 3-101, 2 Tip Size, Acetylene Gas Service, GPP Tip Type
Cutting Tip, 3-101, 2 Tip Size, Acetylene Gas Service, GPP Tip Type
item: Cutting Tip
Series: 3-101
Tip Size: 2
Gas Service: Acetylene
Tip Type: GPP
Cutting Tip, 3-101, 1 Tip Size, Acetylene Gas Service, GPP Tip Type
Cutting Tip, 3-101, 1 Tip Size, Acetylene Gas Service, GPP Tip Type
item: Cutting Tip
Series: 3-101
Tip Size: 1
Gas Service: Acetylene
Tip Type: GPP
Cutting Tip, 3-101, 0 Tip Size, Acetylene Gas Service, GPP Tip Type
Cutting Tip, 3-101, 0 Tip Size, Acetylene Gas Service, GPP Tip Type
item: Cutting Tip
Series: 3-101
Tip Size: 0
Gas Service: Acetylene
Tip Type: GPP
Weldmark TIG Collet 1/16″ For HW-20, 9, 25 Torches
Weldmark TIG Collet 1/16″ For HW-20, 9, 25 Torches
ESAB 15 Amp Cutting Tip PT-31/31XL Plasma Torch
ESAB 15 Amp Cutting Tip PT-31/31XL Plasma Torch
ESAB Brand ( L-Tec ), Model 19667 15 Amp Cutting Tip
Compatible with:
▪ PT-31
▪ PT-31XL
ESAB 30 Amp Cutting Tip for PT-31/31XL Plasma Torch
ESAB 30 Amp Cutting Tip for PT-31/31XL Plasma Torch
ESAB Brand, Model 18866 30 Amp Cutting Tip
Compatible with PT-31
Thermal Dynamics 40 Amp Drag Tip for SL60/100 Plasma Torch
Thermal Dynamics 40 Amp Drag Tip for SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8207 40 Amp Cutting Drag Tip
Compatible with:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100