Welding
Showing 21–39 of 39 results
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
Lincoln Excalibur 7018-1 MR Low Hydrogen Mild Steel Stick Electrode
Lincoln Excalibur 7018-1 MR Low Hydrogen Mild Steel Stick Electrode
Lincoln Excalibur 7018 MR Low Hydrogen Mild Steel Stick Electrode
Lincoln Excalibur 7018 MR Low Hydrogen Mild Steel Stick Electrode
J. W. Harris E70S-2 Steel TIG Rod 10# box
J. W. Harris E70S-2 Steel TIG Rod 10# box
ESAB Spoolarc 65E Carbon Steel TIG Rod
ESAB Spoolarc 65E Carbon Steel TIG Rod
ESAB Spoolarc TIG Rod
ESAB Spoolarc 65 is a triple deoxidized (Aluminum, Titanium, Zirconium) welding wire designed for welding over rust and mill scale. The less fluid weld puddle of Spoolarc 65 makes it easy to control when used out of position. Spoolarc 65 is the preferred wire for all position welding of small diameter.
Specifications:
▪ Classification: AWS A5.18:ER70S-2 H4
▪ Approvals: MIL-E-23765/1 70S-2
Weldmark 3/32″ TIG Collet Body For HW-20, 9, 25 Torches
Weldmark 3/32″ TIG Collet Body For HW-20, 9, 25 Torches
LINCOLN SHIELD-ARC 85
LINCOLN SHIELD-ARC 85
Top Features
- For welding 0.50% molybdenum steel
- Light slag with minimal arc interference
- Deep penetration and superior puddle control
- Clean, visible weld puddle
- Capable of 480 MPa (70 ksi) tensile strength weld deposits
Typical Applications
- API 5L X42 through X56 grade pipe
- Cross country and in-plant pipe
Welding Positions
All
Blue Demon Low Fuming Brazing Bare 1# Tube
Blue Demon Low Fuming Brazing Bare 1# Tube
Blue Demon Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated. This brazing rod has a low melting point making it easily machinable and excellent for sheet metal work. This alloy also possesses high tensile strength and good ductility.
Hobart 418 E7018-1 H4R Low Hydrogen Stick Electrode
Hobart 418 E7018-1 H4R Low Hydrogen Stick Electrode
ESAB AtomArc 9018-CM Low Hydrogen Stick Electrode
ESAB AtomArc 9018-CM Low Hydrogen Stick Electrode
ESAB AtomArc 9018-CM Low Alloy Stick Electrode
ESAB AtomArc 9018-CM Low Alloy Stick Electrode
ESAB AtomArc 7018-Mo Low Alloy Stick Electrode
ESAB AtomArc 7018-Mo Low Alloy Stick Electrode
Atom Arc 7018-Mo electrodes contain 0.5% Mo as alloy addition. They are recommended for welding low-alloy, high tensile steels of 50 ksi (345 MPa) minimum yield strength and also 0.5% Molybdenum steels and pipes. They are widely employed in the fabrication and erection of boilers, pressure piping and tubing and other pressure vessel applications.
Classifications: AWS A5.5:E7018-A1 H4R, ASME SFA 5.5
Approvals: ABS AWS A5.5: E7018-A1
Industry or Segmentation: Civil Construction, Mobile Equipment, Power Generation, Industrial and General Fabrication
ESAB Arcaloy 309L-16 Stainless Steel Stick Electrode
ESAB Arcaloy 309L-16 Stainless Steel Stick Electrode
ESAB Arcaloy 308L-16 Stainless Steel Electrode
ESAB Arcaloy 308L-16 Stainless Steel Electrode
ESAB ER90S-B3 Steel TIG Rod 10# box
ESAB ER90S-B3 Steel TIG Rod 10# box
ESAB TIG rod ER90S-B3 is a Chrome-Moly TIG rod used for joining 2.5% Cr – 1% Mo creep resistant steels. These non-copper-coated rods are primarily used to fabricate and repair power piping, pressure vessels, heat exchangers and boilers in the power generation industry.
Specifications:
▪ Classification: ASME SFA 5.28, AWS A5.28, ER90S-B3AWS A5.28,
▪ Weight: 10# box
ESAB ER80S-B2 Steel TIG Rod
ESAB ER80S-B2 Steel TIG Rod
ESAB TIG rod ER80S-B2 is a chrome-moly TIG rod used for joining creep resistant steels of the 0.5% Cr – 0.5% Mo, 1% Cr – 0.5% Mo, and 1.25% Cr – 0.5% Mo grades. These non-copper-coated rods are primarily used to fabricate and repair power piping and boilers in the power generation industry.
Specifications:
▪ Classification: AWS A5.28, ER80S-B2
- Weight: 10# package