MIG & Flux Core (GMAW/FCAW)
Showing all 4 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Binzel M8 Standard-Life Copper Contact Tip .035
Binzel M8 Standard-Life Copper Contact Tip .035
Binzel Brand, Model 140.0214 .035” M8 Standard -Life Copper Contact Tip.
Compatible with all Abicor Binzel MIG/MAG/Push Pull Guns:
▪ ABIMIG AT 355
▪ ABIMIG AT 415
▪ Delta -MIG 3
▪ Delta- MIG 4
▪ ABIMIG A 355
▪ ABIMIG A 415
▪ ABIMIG Grip LW3
▪ ABIMIG Grip LW4
▪ ABIMIG WT 440 Water-Cooled
▪ ABIMIG W 440 Water Cooled
▪ MB 501D Water-Cooled
▪ Push Pull Plus 36
▪ Push Pull Inline 36
▪ PPG/W 26KD