MIG & Flux Core (GMAW/FCAW)
Showing 1–20 of 153 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
The METAL MAN Heavy Duty Single/Dual Bottle Welding Cart is designed for multiple uses. It can be used to hold portable wire welders, plasma cutters and TIG welders along with the bottle of shielding gas needed for that application. Its unique Cylinder rack allows you to configure it to carry one bottle of gas up to 10 inches in diameter and up to 300 cu. Ft.; or two separate bottles of gas up to 7-1/2 inches in diameter or 150 cu. Ft each. Or use this welding cart to hold two separate welders or a welder and a plasma cutter. The third use for this Cart is as a power source and feeder cart. The bottom shelf has an 18 inch clearance, giving ample space to store a smaller, inverter-based welding power source on the bottom shelf. The top shelf has ample space to fit a wire feeder. In addition, the top of the cylinder securement rack can be removed to accommodate the wire feeder spool holder and a large spool of wire.
SPECIFICATIONS:
- Holds one 10” dia. Cylinder or two 7-1/2” dia. Cylinder
- Fold Down Handle
- Wrap Around Cable Holders
- 400 lb. Capacity
- 8” Rear Wheels
- 2 Locking Front Casters
- Removable Top Cylinder Rack For Industrial Wire Feeder Applications
- 18 Gauge Steel Construction with Powder Coat Finish
FEATURES:
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Model PX15-145 1/16” – 5/64” X 15’ Liner
Compatible with MIG Gun Profax 1260 Self Shielded Flux Core
ESAB Dual Shield 7100 Ultra E71T-1CH8/E71T-9MD Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool
ESAB Dual Shield 7100 Ultra E71T-1CH8/E71T-9MD Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
J.W. Harris Compound 302 Postweld Stainless Steel Cleaner
J.W. Harris Compound 302 Postweld Stainless Steel Cleaner
Compound 302 Postweld Stainless Steel Cleaner
Effectively removes heat-tint, weld-burn and discoloration and rust from all grades of stainless steel. It is a unique chemical formulation of paste-like consistency, with mineral acids, deoxidizers and penetrants. The active ingredients dissolve the hard-to-remove blue oxidation color and weld-burn. It clings to vertical, horizontal and intricate surfaces and can be applied by a cloth. Compound 302 can also be used as a general acid cleaner for copper, brass and bronze.
Specifications:
| Package Size | 24 oz. Container |
Profax Contact Tip for 1260 Series MIG Guns
Profax Contact Tip for 1260 Series MIG Guns
Profax PX12-656 Contact Tip
Compatible with ProFax MIG Guns:
▪ 1260 Series
▪ 2640 Self Shielded Flux Core
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard Model N1C58HQ Quik series 1 with 5/8″ bore, heavy duty, plated copper; threaded nozzle
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Hobart FabTuf 960 Gas Shielded Flux Core Hard Face Alloy Steel Tubular Wire .045 33# Spool
Hobart FabTuf 960 Gas Shielded Flux Core Hard Face Alloy Steel Tubular Wire .045 33# Spool
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030” – .035’” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Roughneck
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Miller Millermatic 211 MIG Welder With Advanced Auto-Set
Miller Millermatic 211 MIG Welder With Advanced Auto-Set
Comes complete with:
- Power source
- 10 ft. (3 m) MDX™-100 MIG gun
- 10 ft. (3 m) work cable with clamp
- 5 ft. (2 m) power cord with MVP™ plugs for 120 V and 240 V
- Flow gauge regulator and gas hose for argon or AR/CO2 mix
- Hobart® spool of .030 in. (0.8 mm) solid wire
- Two contact tips for .030 in. (0.8 mm) wire
- Quick Select™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
- Material thickness gauge
- Hook-and-loop cord wraps
Miller .035-.040 Contact Tip For Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .035-.040 Contact Tip For Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .035” – .040” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
ESAB Rebel EMP 235ic Multi-Process Welder
ESAB Rebel EMP 235ic Multi-Process Welder
Introducing Rebel EMP 235ic – the next level Rebel welding machine that offers TRUE multi-process performance in a portable package. When it comes to getting around and getting work done, Rebel EMP 235ic is second to none. It is the most mobile welder in its class and has the power and performance to crush even the most demanding jobs.
PACKAGE INCLUDES:
▪ Rebel EMP 235ic power supply
▪ Tweco SprayMaster 250 MIG gun
▪ Victor argon flowmeter regulator
▪ 12.5 ft. (3.8 m) hose
▪ return clamp with leads, drive rolls and contact tips
▪ .035 in. (0.9 mm) wire
▪ electrode holder
▪ ESAB Atom Arc 7018 electrodes
▪ power adapter
▪ operator’s manual
Miller Multimatic 220 AC/DC
Miller Multimatic 220 AC/DC
The Miller Multimatic™ 220 AC/DC is a true multi-process welder that is capable of AC (aluminum) TIG welding. The Multimatic 220 AC/DC produces up to 230 amps of MIG welding output and up to 210 amps of TIG welding output. The complete portable MIG, Stick and AC/DC TIG welding package comes with Miller® MDX™-100 MIG welding gun, Weldcraft™ 150 amp TIG torch with accessories, remote foot control, two argon flow regulators with hoses, stick electrode holder and ground clamp.
The Multimatic™ 220 AC/DC comes standard with a color LCD screen and features Miller’s Auto-Set™ Elite. Auto-Set™ Elite sets MIG, Stick and TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. It also allows you to fine tune weld settings manually to suit your individual preferences. The 220 AC/DC runs on either 120 volt or 240 volt input power, using Miller’s exclusive multi-voltage plug (MVP™) and weighs only 56 pounds.
907757 Multimatic 220
Comes complete with:
- Power source
- 10 ft. (3 m) MDX™-100 MIG gun
- 13 ft. (4 m) cable electrode holder and 25 mm Dinse-style connector
- 5 ft. (3.8 m) Weldcraft™ A-150 (WP-17) TIG torch with 25 mm Dinse-style connector
- 10 ft. (3 m) work cable with clamp and 25 mm Dinse-style connector
- 5 ft. (2 m) power cord with MVP™ plugs for 120 V and 240 V
- RFCS-14 HD foot control with 20 ft. (6 m) cord Two flow gauge regulators and gas hoses for argon or AR/CO2 mix
- Hobart® spool of .030 in. (0.8 mm) solid wire
- Two contact tips for .030 in. (0.8 mm) wire
- Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. 8/0.9 mm) flux-cored wire
- AK2C TIG torch accessory kit
- Material thickness gauge
- Hook-and-loop cord wraps