Oxyfuel Gas Welding (OAW)
Showing all 11 results
J.W. Harris Stay Brite 1/16″ X 1# Spool
J.W. Harris Stay Brite 1/16″ X 1# Spool
The important advantage of Stay-Brite® solders is the greater strength of the overall component. After joining, its lower working temperature eliminates the weakening of the base metals caused by annealment from high brazing heat. The result is a stronger, more economical joint.
Stay-Brite® silver bearing solders have the same excellent affinity as SafetySilv® alloys for bonding with most of the ferrous and nonferrous alloys (including stainless steel, nickel, copper, brass, etc.) It provides a considerably higher than necessary elongation for sound dissimilar metal joints and vibration applications.
Stay-Brite® alloys range in temperature from 430°F to 535°F. Stay-Brite® solder eliminates oxide scale formed from brazing heat. No nitrogen purge is required for HVAC/R tubes. They are cadmium free and nontoxic. Stay-Brite® is a eutectic alloy with a single melting point of 430°F (221°C).
Specifications:
|
Package Size |
1 lb Spool |
|
Diameter |
1/16 |
J.W. Harris Stay Brite Solder Kit
J.W. Harris Stay Brite Solder Kit
The Stay Brite lead-free solder kit contains .5 oz of silver solder and .5 oz of Stay Clear flux. It is for use on all metals except aluminum. This low temperature solder is excellent for many HVAC connections.
J.W. Harris AlSolder 500 Aluminum Solder Kit
J.W. Harris AlSolder 500 Aluminum Solder Kit
The Harris Al-Solder 500 aluminum solder & flux kit for torch or iron is used all solder-able alloys to each other and to dissimilar metals. Also for zinc die-cast. Forms excellent, corrosion resistant joints on the tough to solder aluminum alloys. Also beneficial as a high temperature solder on most other metals. Not recommended for magnesium.
Forms excellent corrosion resistant joints on the tough-to-solder aluminum alloys. Joins all solder-able aluminum alloys to each other and to dissimilar metals, both ferrous and nonferrous. Also beneficial as a high temperature solder on most other metals.
Procedure:
- Clean the area to be soldered
- Apply Stay Clean aluminum flux
- If using an open flame, heat indirectly with the torch in motion (do not direct the torch on the flux)
- Heat until the flux becomes a nut brown color
- Apply the alloy
- Discontinue heat as soon as flow
- Allow to cool. Remove flux residue with wire brush and hot water
Features:
· Tensile strength – Up to 20,000 PSI
· Solidus – 391ºF
· Liquidus – 482ºF
· Good color match on aluminum and zinc die cast
Specifications:
|
Package Includes |
1.75 oz Al-solder 500 1 oz Stay-Clean Aluminum Flux |
|
|
|
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
This Hotspotter is an all-purpose propane flame tool that operates off the pressure of a standard propane tank-no regulator required. Ergonomic handle with adjustable trigger. Hooks up to standard 20 lb. Propane tank. Operates with no smoke and no fumes.
Appropriate for a wide variety of all-season maintenance/repair applications at commercial offices, factories, institutions, warehouses, parks, residential properties, farms, and parking lots.
Some uses include:
▪ Burn weeds
▪ Repair asphalt
▪ Seal tar
▪ Peel paint
▪ Remove road markings
▪ Melt ice
▪ Thaw pipes
Features and Specifications:
▪ Delivers up to 550,000 BTU
▪ Durable 10 ft. neoprene hose
▪ Accurate brass flow control shut-off valve
▪ Brass propane tank adaptor
▪ Spark ignitor
▪ Durable cast iron and steel nozzle (WB-101)
▪ Welded tube nozzle (WB-100 & WB-102)
▪ 31″ Heavy-Duty Handle
▪ Meets NFPA 51 specifications
▪ Excess Flow Valve
▪ One year warranty
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor Turbo Torch Genuine Sof-Flame WA-400 Acetylene Torch Handle for your Sof-Flame soldering equipment. Handle accepts all S series tips and most major brands of “screw-in” soldering tips.
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Cuts up to 8-inch (203 mm) thick steel. Solid silver-brazed construction. Features o-ring seating and easy-to-change slip-in Graf-Tite cutting tips with cost-saving soft seats. Use with any industrial fuel gases “” acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special-purpose tips are available for use in SC200 Series cutting attachments. SC200 series torch handles are covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Handles:
- WH200A
Compatible Tips: Welding: SC Series Tips
FEATURES:
SPECIFICATIONS:
J.W. Harris 50/50 Solder 1/8″ 1# Spool
J.W. Harris 50/50 Solder 1/8″ 1# Spool
The Harris 50/50 common lead-bearing solder With some exceptions, can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core. Note: It is illegal to use lead solders in both public and private potable water systems.
CAUTION: Lead-bearing solders are not to be used in potable water systems.
Typical Application: A tin-lead alloy with a wide melting range. Used for automotive, radiator, general purpose soldering, electrical applications.
Specifications:
|
Diameter |
1/8″ |
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
Stay Silv 2 brazing filler metal is a medium temperature range alloy for brazing copper, and copper to brass. The addition of silver provides an 1190°F solidus which widens the melting range compared to Harris 0. Stay Silv 2 is useful for applications with clearances of 0.002″
25# package size
Miller-Smith Heavy Duty Cutting Torch Handle
Miller-Smith Heavy Duty Cutting Torch Handle
Heavy-duty handle allows high gas flow for large cutting tips and heating tips. Heavy-duty handles have replaceable hose connections. “B”-size inlet connections are 9/16″-18. Length: 7.5 inches (191 mm). Torches have silver-brazed joints to provide overall strength and rigidity for safe performance under rugged conditions. Works with all SC Series cutting tips, ST Series heating tips and SW Series welding tips.WH200A torch handle is covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Cutting Attachments:
• SC209
• SC205
FEATURES:
Victor ST1000FC VanGuard Heavy Duty Cutting Torch With 90° Head
Victor ST1000FC VanGuard Heavy Duty Cutting Torch With 90° Head
Genuine Victor® ST 1000FC is a heavy-duty straight cutting torch with bottom, rear-mounted cutting oxygen valve lever. It designed for use in scrap yards, demolition and foundry work. The ST 1000FC has a forged 90° brass head with stainless steel gas tubes and comes complete with built-in reverse flow check valves and flashback arrestors. It can cut up to 5 inch thick steel using Victor “1” series cutting tips. For use with any fuel gas, 5 PSIG and above. Hose connection – 9/16″-18 (B)
Victor 100FC 100 Series “VanGuard” Medium Duty Torch Handle
Victor 100FC 100 Series “VanGuard” Medium Duty Torch Handle
