Shop
Showing 1–20 of 35 results
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Model PX15-145 1/16” – 5/64” X 15’ Liner
Compatible with MIG Gun Profax 1260 Self Shielded Flux Core
Profax Contact Tip for 1260 Series MIG Guns
Profax Contact Tip for 1260 Series MIG Guns
Profax PX12-656 Contact Tip
Compatible with ProFax MIG Guns:
▪ 1260 Series
▪ 2640 Self Shielded Flux Core
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0093 40 Amp Drag Tip
Compatible with:
▪ CUTMASTER 42
▪ SL40
Thermal Dynamics Extra Cool Torch Coolant
Thermal Dynamics Extra Cool Torch Coolant
Thermal Dynamic 1 Gallon Red Extra Cool 7-3580 Propylene Glycol Torch Coolant Formulated using de-ionized water, Resistance value of 0.4 mega ohm/cm or greater to prevent the coolant from carrying an electrical current. 70/30 coolant mixture, Resists freezing to +10 deg F (-12 deg C) Water soluble 1 specific gravity, 5.5 – 7 pH value
Direct Safey Dakota Anti-Fog Safety Glasses
Direct Safey Dakota Anti-Fog Safety Glasses
Direct Safey Dakota Anti Fog and Hardcoat Lens Safety Glasses
Features and Benefits
- One-piece wraparound for wide view
- hardcoat lenses
Applications
- General purpose eye protection
- Areas where protection against bright lighting is needed
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8206, 30 Amp Drag Tip.
Compatible with:
▪ Cutmaster 52
▪ Cutmaster 82
▪ Cutmaster 102
▪ Cutmaster 152
▪ SL60
▪ SL100
Thermal Dynamics 100 Amp Nitrogen Marked Standard Electrode For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Nitrogen Marked Standard Electrode For XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1089, 100 Amp Nitrogen Marked Standard Electrode
Compatible with XT-301 Plasma Torch
Thermal Dynamics 40 Amp Electrode for PCH-125/PCM-125 Plasma Torch
Thermal Dynamics 40 Amp Electrode for PCH-125/PCM-125 Plasma Torch
Thermal Dynamics Brand, Model 9-6542, 40 Amp Electrode
Compatible with PCH-125 & PCM-125 plasma torch.
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8211, 80 Amp Tip
Compatible with:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics 55-100 Amp Shield Gas Distributor for XT-301 Plasma Torch
Thermal Dynamics 55-100 Amp Shield Gas Distributor for XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1272, 55 – 100 Amp Shield Gas Distributor
Compatible Plasma Torch is XT-301
10″ Chrome Finish Adjustable Wrench
10″ Chrome Finish Adjustable Wrench
10″ Adjustable Wrench MUSA – Boxed
- World Famous Crescent® Brand, Made in the USA
- For Professional, Industrial or Home Use
- Wide Capacity Jaw Allows Each Tool to Work with More Fastener Sizes
- Wider Handle Provides More Comfort and Less Stress to the Hand
- Tension Spring Stabilizes Jaw and Knurl Adjusts Easily
- Alloy Steel and Heat Treated
- Proportioned Dimensions for Greatest Strength and Minimum Weight
- Chrome Plated Finish Resists Rust and Corrosion
- Polished Head and Regular, Satin Finished Handle
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics Brand, Model 9-8215, 30 – 120 Amp Electrode
Compatible with Plasma Torch:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamic Brand, Model 35-1053 100 Amp Air/Oxygen Tip
Compatible with XT-301 plasma torch.
Cutmaster 60i Thermal Dynamics Plasma Cutter
Cutmaster 60i Thermal Dynamics Plasma Cutter
Featured:
- Built for portability and durability with the integral multi-handle design, available in either a 1 phase or 3 phase unit
- 50% Duty Cycle at 60A with automatic multi-voltage detection from 208-480V
- Industrial SL60QD 1Torch quick disconnect with ATC® (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok® technology
- Up to 3/4 in. (20 mm) recommended cut capacity with maximum sever of 1-1/2 in. (38 mm) and 3/4 in. (20 mm) pierce capability
- High-visibility, oversized display with gas optimizer technology and consumables end-of-life indicator, makes setup and usage simple and productive
- Cutmaster Black Series electrode included for up to 60% longer life of consumable parts
- Industry leading 4-year warranty on power supply and 1-year warranty on torch
THD1-5630-1
Cutmaster 82 Thermal Dynamics Plasma Cutter
Cutmaster 82 Thermal Dynamics Plasma Cutter
Featured:
- Front Panel LEDs indicate status conditions for maximum efficiency
- Storage compartment for convenient access to spare parts and consumables.
- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions or convert to a machine torch.
- True Guard roll bar provides easy transportation and protection for unmatched durability.
- Multi-voltage allows operation from 208 to 480 Volts in a single power supply.
- Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
- Lighter weight design for maximum portability
PERFORMANCE
- Maximum Cut – 1 1/2″ (40 mm)
- Recommended Cut – 3/4″ (20 mm)
- Pierce Rating – 5/8″ (15 mm)
- Max Amperage Output – 80A
- Output Power – 9 kW
DIMENSIONS
- 12″ W x 15″ H x 24″ D (305 mm x 381 mm x 610 mm)
WEIGHT
- 43 lbs (19.5 kg)
TORCH
- SL60
- Air Pressure – 70 psi (4.8 bar)
- 6.7 cfm (190 l/m)
INPUT VOLTAGE
- 208-230/460V, 1/3 ph, 50/60 Hz
- 400V, 3 ph, 50 Hz
- 600V, 3 ph, 50/60 Hz
DUTY CYCLE (@ 40º C)
- 40% @ 80A
- 60% @ 65A
- 100% @ 55A
AMPERAGE DRAW
- 72A @ 230V, 1 ph
- 39A @ 230V, 3 ph
- 21A @ 460V, 3 ph
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8236, 70 – 100 Amp Drag Shield Cap
Compatible:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100 Plasma Torch
MetalMaster Compound Action Snips
MetalMaster Compound Action Snips
LEFT/RIGHT/STRAIGHT CUT METALMASTER COMPOUND ACTION SNIP
Wiss® snips are made of extra tough and wear-resistant special molybdenum steel, which provides the extra service required by the compound lever action to withstand the severe strain of cutting heavy stock or curves.
FEATURES:
▪ Non slip serrated jaws of Wiss Metalmaster® Snips are made of extra tough wear resistant molybdenum
▪ Jaws provide extra service demanded by the compound lever action
▪ Wiss Snips withstand the severe strain of cutting heavy stock and tight curves
▪ Jaws have self-opening action for fast, effortless feed
▪ Handles formed from high strength steel, provide a margin of strength far above the limit of the hand
▪ Grips are non-slip and textured for superior control, safety and comfort
▪ Convenient protective safety latch
▪ Handles with handy hang-up holes
▪ Favorite tool of metal-working craftsmen
▪ Straight Cutting – 18 gauge (1.2mm) – Yellow grips
Thermal Dynamics Start Cartridge for Cutmaster 42 Plasma Cutter
Thermal Dynamics Start Cartridge for Cutmaster 42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0097, Start Cartridge
Compatible Plasma Torch SL40 for CUTMASTER 42
Thermal Dynamics Start Cartridge For SL60/100 Plasma Torch
Thermal Dynamics Start Cartridge For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8213, Start Cartridge
Compatible Plasma Torches:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100