Shop
Showing 1–20 of 134 results
Lincoln Viking 3350 Series Outside Cover lens
Lincoln Viking 3350 Series Outside Cover lens
LN-25 PRO Wire Feeder Used
LN-25 PRO Wire Feeder Used
LN-25 PRO series wire feeders are designed to be simple, reliable and easy to service. Whether you are an ironworker, pipeline welder, or weld at a construction site, shipbuilding facility or metal fabrication shop, we have the right semiautomatic wire feeder for you.
• Maxtrac® Wire Drive System – Heavy-duty cast aluminum wire drive system provides reliable feeding and durability.
• Dual Range Wire Feed Speed – Delivers greater precision at low end wire feed speeds.
• Trigger Interlock Switch – Provides operator comfort for long welds.
• Replaceable and Flame Resistant Case – Rugged and durable case can be replaced in less than five minutes.
• Potted PC Boards – For moisture and corrosion protection.
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Fox Fire Abrasive Disc Conditioner
Fox Fire Abrasive Disc Conditioner
FOXFIRE Abrasive Conditioner
FOXFIRE™ is a revolutionary new grinding lubricant formulated to dramatically extend the life of abrasives and make grinding easier. FOXFIRE™ is a white, extra dry solid that is very clean to use. When applied to an abrasive surface, friction from grinding causes the FOXFIRE™ coating to melt, liquefy and act as a lubricant and release agent. Materials being ground do not load or clog cutting surfaces so abrasives run cooler and last longer. Unlike beeswax or petroleum based products, FOXFIRE™ is not sticky and parts can be blown clean.
FOXFIRE™ works best for grinding aluminum or plastic, removing automotive paint, or any other material that can melt into or clog abrasive surfaces. Discs or belts treated with FOXFIRE™ last longer… up to twenty times longer when grinding aluminum. Abrasive wheel cut off blades treated with FOXFIRE™ cut aluminum like butter without build-up on the cutting wheel. FOXFIRE™ also extends the life of abrasives used to grind stainless steel and carbon steel and leaves no residue that can affect welds made after grinding. In addition, FOXFIRE™ works well on saw blades, taps, drill bits and many other applications where a lubricant or release agent is needed or liquid coolant cannot be used.
Benefits:
▪ FOXFIRE™ increases productivity
▪ Non-toxic and safe
▪ Abrasives stay sharp much longer and cut faster
▪ Time once spent changing discs or belts can be used for grinding
Lincoln 3.73″ X 3.53″ Inside Cover Lens For Viking 3350 Series Helmet
Lincoln 3.73″ X 3.53″ Inside Cover Lens For Viking 3350 Series Helmet
Lincoln Excalibur 8018-B2 MR
Lincoln Excalibur 8018-B2 MR
Top Features
- Designed for welding 1.25% chromium, 0.50% molybdenum steel
- Premium arc performance
- Square coating burn-off
- Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength after 8 hours of stress-relieving at 690°C (1275°F)
Typical Applications
- Power generation
- Petrochemical
- Pressure vessels
- Process piping
Welding Positions
All, except vertical down
Lincoln Viking 4C Black Welding Helmet
Lincoln Viking 4C Black Welding Helmet
FEATURES:
SPECIFICATIONS:
Lincoln .035 Tapered Contact Tip For Magnum PRO
Lincoln .035 Tapered Contact Tip For Magnum PRO
Lincoln .035” Tapered Contact Tip.
Compatible with MIG guns:
· Magnum Pro 100L
· Magnum Pro 250L
· Magnum Pro 350
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-62R, 1/8” recess, 5/8” Thread-on Welding Nozzle.
Nozzle is compatible with:
▪ Magnum PRO 250L
▪ Magnum PRO 350L
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-50R, 1/8” recess, 1/2” Thread-on Welding Nozzle
Nozzle is compatible with:
· Magnum PRO 250L
· Magnum PRO 350L
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln .035 Contact Tip For Magnum PRO MIG Guns
Lincoln .035 Contact Tip For Magnum PRO MIG Guns
Lincoln .035” Copper Plus Contact Tip.
10 per pack
Compatible with MIG guns:
· Magnum Pro 100L
· Magnum Pro 250L
· Magnum Pro 350
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 67212 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
• Abrasive: Zirconia Alumina Z
• Workpiece Materials: Steel, Stainless Steel
• Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
• Diameter: 4 1/2 Inches
• Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Curve
• Max RPM: 13,300
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 64502 Chopsaw Wheel
The Pferd Performance Line SG – Elastic chop saw wheels feature premium aluminum oxide grain and a strong center reinforcement layer for fast, free cutting action and long service life. These wheel provide excellent cutting results on machines with up to 5 horsepower output.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material., rebar, tubing, and other small cross sections
• Diameter: 14 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 1” A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 4,400
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
PFE 31062 Mounted Point
Hardness grade R mounted points are made of grey silicon carbide in a vitrified bond. These products are noted for their hardness and durability.
Advantages:
▪ Hardness grade R tools are ideally suited for heavy-duty edge grinding on castings. They are distinguished by their high edge-holding capability, long service life and low wear.
▪ Due to their special edge-holding properties, hardness grade R mounted points can also be used economically with low RPM power tools.
▪ In edge grinding operations, hardness grade R mounted points perform best at a recommended peripheral speed of 6,000 – 9,800 SFPM. For surface grinding we recommend a peripheral speed of 4,000 – 6,000 SFPM. Suitable drive systems include flexible shafts and electric or air-powered straight grinders.
Specifications:
▪ Shape: A11
▪ Diameter: 7/8”
▪ Length: 2”
▪ Shank Diameter: ¼”
▪ Grit: 30
▪ Max RPM: 19,860
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Specifications
Diameter: | .035 |
Package: | 44 lb. Spool |
SKU: | LINED032366 |
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Alumina Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: .035 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 25,000