Shop
Showing all 9 results
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Weldmark E6011 Mild Steel Electrode 1/8″ X 14″ 5# Tube
Weldmark E6011 Mild Steel Electrode 1/8″ X 14″ 5# Tube
Blue Demon E6011 is a mild-steel, all position electrode designed primarily for use on AC power sources. It produces a strong arc force for deep penetration and a fine spray transfer that enhances operator appeal. Fast freezing or rapid solidification of the metal allows welding in the vertical and overhead position. Its light slag eliminates slag holes that are prevalent on some applications with other electrodes.
Typical Applications: general purpose fabrication, galvanized steel work, structural work, shipbuilding
Specifications:
|
Diameter: |
1/8″ |
Pferd 4″ 5/8-11 Thd .014 Carbon Steel Wire Standard Twist knot
Pferd 4″ 5/8-11 Thd .014 Carbon Steel Wire Standard Twist knot
Pferd 6″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Pferd 6″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
| Diameter: | 6″ |
Pferd 4-1/2″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Pferd 4-1/2″ .020 Carbon Steel Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
| Diameter: | 4-1/2″ |
Pferd 4″ .020 Carbon Steel Wire Stringer Bead Twist Knot Wheel
Pferd 4″ .020 Carbon Steel Wire Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
| Diameter: | 4″ |
Pferd 4″ .020 Carbon Steel Wire Full Cable Twist Knot Wheel
Pferd 4″ .020 Carbon Steel Wire Full Cable Twist Knot Wheel
Threaded Wheel Brushes – Full Cable Twist Knot Wheel
Narrow face allows better control of surface contact area. Full cable twist is ideal for the toughest brushing applications where surface finish is a low priority.
For optimal performance use on angle grinders.
Specifications:
|
Diameter: |
4″ |
Pferd 4″ .014 Carbon Steel Wire Full Cable Twist Knot Wheel
Pferd 4″ .014 Carbon Steel Wire Full Cable Twist Knot Wheel
Threaded Wheel Brushes – Full Cable Twist Knot Wheel
Narrow face allows better control of surface contact area. Full cable twist is ideal for the toughest brushing applications where surface finish is a low priority.
For optimal performance use on angle grinders.
Specifications:
|
Diameter: |
4″ |
Pferd 3 1/2″ .014 Knot Cup Brush Carbon Steel Standard Twist
Pferd 3 1/2″ .014 Knot Cup Brush Carbon Steel Standard Twist
Knot Cup Brushes – External Nut, Single Row – Standard Twist – Carbon Steel
For use on large surfaces where a great deal of roughing is required. Good for corners and angles and removal of contaminants such as scale, concrete, slag or marine growth.
Recommended for suitable drive systems: stationary machines and angle grinders. When using angle grinders, please observe permitted RPM limit of the brush.
Specifications:
| Diameter: | 3-1/2″ |