Shop
Showing all 14 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
DeWalt DW8021R3 High Speed Cutting Wheel
The DeWalt High Speed Cutting Wheels are made with high-performance aluminum oxide grain that offers increased life and superior material removal, DEWALT Type 1 HP Metal Cutting High Speed Wheels feature 2 full sheets of thick fiberglass for strength and safety. A high grain concentration enables aggressive cutting action and smooth-running wheels.
Specifications:
▪ Arbor: 20
▪ Diameter: 14
▪ Grain: Aluminum Oxide
▪ Application: Ductile Pipe
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt DW3983 Bi-Metal Portable Band Saw Blade
The DeWalt Bi-Metal Portable Bandsaw Blades are packed with a Matrix II High-Speed Steel Edge, 8% cobalt content, and Rc 65-67 tooth hardness, DEWALT Bi-Metal Portable Bandsaw Blades can stand up to extreme heat and wear. An alloy steel backer resists fatigue.
Specifications:
▪ Length: 44 7/8 Inches
▪ Teeth Per Inch: 18
▪ Thickness: .02
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
TapRite CO2 Beer Regulator, CGA 320
TapRite CO2 Beer Regulator, CGA 320
Our Economy Series Primary Beer Regulator for Home Draft Dispense is easy to use and easy to maintain. The set screw adjustment makes it a “set and forget” tool for maintaining constant pressure into your system. The regulator’s brass body and zinc bonnet make it corrosion resistant and highly durable in a number of environments. This 1 Pressure 1 Product Regulator has a CGA320 Inlet, 5/16″Barb Shutoff w/Check, and 60lb and 2000lb Gauges so you can see both your output pressure and how much CO2 is left in your tank.
Specifications:
· CGA: 320
· Gas Service: Carbon Dioxide
· Pressure Range: 0 – 50 psig
· Regulator Outlet Type: 5/16″
Dewalt T25 Torx Bit pkg 25
Dewalt T25 Torx Bit pkg 25
Bit Tip Style | Torx |
---|---|
Bit Tip Size | T25 |
DEWALT PHILLIPS INSERT BIT, 25 PER PKG
DEWALT PHILLIPS INSERT BIT, 25 PER PKG
Features
- Shock-resistant tool steel for longer life.
- Snub nose design for ideal fitment.
- Advanced hardening process provides maximum durability.
- #1, 2 and 3
- 25 PER PKG
TapRite Nitrogen Beverage Regulator, CGA 580
TapRite Nitrogen Beverage Regulator, CGA 580
Primary Beer, Wine, and Coffee Regulator, N2, 1P1P, CGA580 Inlet, 5/16″ Barb Shut-off w/Duckbill Check, 60lb & 3000lb Gauges. Suitable for use with Nitrogen, Mixed Gas (Beer Gas), and Argon.
Specifications:
· CGA: 580
· Gas Service: Argon, Nitrogen, Beer Gas
· Pressure Range: 0 – 50 psig
· Regulator Outlet Type: 5/16″
Dewalt 6″ High Performance Paddle Switch Grinder with No Lock-On
Dewalt 6″ High Performance Paddle Switch Grinder with No Lock-On
The DWE43144N 6″(150mm) High Performance Cut-Off/Grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Dust Ejection Systemâ„¢ technology clears dust and debris for extra protection. Power tool shuts off before overheating with Power-Off®Advanced Overload Protection.
Dewalt 4-1/2″ X 5″ High Performance Paddle Switch Grinder with No Lock-On
Dewalt 4-1/2″ X 5″ High Performance Paddle Switch Grinder with No Lock-On
The DWE43114 4-1/2″(115mm) / 5″(125mm) High Performance Cut-Off/Grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Dust Ejection Systemâ„¢ technology clears dust and debris for extra protection. Power tool shuts off before overheating with Power-Off®Advanced Overload Protection.