Shop
Showing 1–20 of 35 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0093 40 Amp Drag Tip
Compatible with:
▪ CUTMASTER 42
▪ SL40
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Thermal Dynamics Extra Cool Torch Coolant
Thermal Dynamics Extra Cool Torch Coolant
Thermal Dynamic 1 Gallon Red Extra Cool 7-3580 Propylene Glycol Torch Coolant Formulated using de-ionized water, Resistance value of 0.4 mega ohm/cm or greater to prevent the coolant from carrying an electrical current. 70/30 coolant mixture, Resists freezing to +10 deg F (-12 deg C) Water soluble 1 specific gravity, 5.5 – 7 pH value
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8206, 30 Amp Drag Tip.
Compatible with:
▪ Cutmaster 52
▪ Cutmaster 82
▪ Cutmaster 102
▪ Cutmaster 152
▪ SL60
▪ SL100
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Thermal Dynamics 100 Amp Nitrogen Marked Standard Electrode For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Nitrogen Marked Standard Electrode For XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1089, 100 Amp Nitrogen Marked Standard Electrode
Compatible with XT-301 Plasma Torch
Thermal Dynamics 40 Amp Electrode for PCH-125/PCM-125 Plasma Torch
Thermal Dynamics 40 Amp Electrode for PCH-125/PCM-125 Plasma Torch
Thermal Dynamics Brand, Model 9-6542, 40 Amp Electrode
Compatible with PCH-125 & PCM-125 plasma torch.
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8211, 80 Amp Tip
Compatible with:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
Thermal Dynamics 55-100 Amp Shield Gas Distributor for XT-301 Plasma Torch
Thermal Dynamics 55-100 Amp Shield Gas Distributor for XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1272, 55 – 100 Amp Shield Gas Distributor
Compatible Plasma Torch is XT-301
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics Brand, Model 9-8215, 30 – 120 Amp Electrode
Compatible with Plasma Torch:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamic Brand, Model 35-1053 100 Amp Air/Oxygen Tip
Compatible with XT-301 plasma torch.
Cutmaster 60i Thermal Dynamics Plasma Cutter
Cutmaster 60i Thermal Dynamics Plasma Cutter
Featured:
- Built for portability and durability with the integral multi-handle design, available in either a 1 phase or 3 phase unit
- 50% Duty Cycle at 60A with automatic multi-voltage detection from 208-480V
- Industrial SL60QD 1Torch quick disconnect with ATC® (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok® technology
- Up to 3/4 in. (20 mm) recommended cut capacity with maximum sever of 1-1/2 in. (38 mm) and 3/4 in. (20 mm) pierce capability
- High-visibility, oversized display with gas optimizer technology and consumables end-of-life indicator, makes setup and usage simple and productive
- Cutmaster Black Series electrode included for up to 60% longer life of consumable parts
- Industry leading 4-year warranty on power supply and 1-year warranty on torch
THD1-5630-1
Cutmaster 82 Thermal Dynamics Plasma Cutter
Cutmaster 82 Thermal Dynamics Plasma Cutter
Featured:
- Front Panel LEDs indicate status conditions for maximum efficiency
- Storage compartment for convenient access to spare parts and consumables.
- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions or convert to a machine torch.
- True Guard roll bar provides easy transportation and protection for unmatched durability.
- Multi-voltage allows operation from 208 to 480 Volts in a single power supply.
- Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
- Lighter weight design for maximum portability
PERFORMANCE
- Maximum Cut – 1 1/2″ (40 mm)
- Recommended Cut – 3/4″ (20 mm)
- Pierce Rating – 5/8″ (15 mm)
- Max Amperage Output – 80A
- Output Power – 9 kW
DIMENSIONS
- 12″ W x 15″ H x 24″ D (305 mm x 381 mm x 610 mm)
WEIGHT
- 43 lbs (19.5 kg)
TORCH
- SL60
- Air Pressure – 70 psi (4.8 bar)
- 6.7 cfm (190 l/m)
INPUT VOLTAGE
- 208-230/460V, 1/3 ph, 50/60 Hz
- 400V, 3 ph, 50 Hz
- 600V, 3 ph, 50/60 Hz
DUTY CYCLE (@ 40º C)
- 40% @ 80A
- 60% @ 65A
- 100% @ 55A
AMPERAGE DRAW
- 72A @ 230V, 1 ph
- 39A @ 230V, 3 ph
- 21A @ 460V, 3 ph
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8236, 70 – 100 Amp Drag Shield Cap
Compatible:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100 Plasma Torch
Thermal Dynamics Start Cartridge for Cutmaster 42 Plasma Cutter
Thermal Dynamics Start Cartridge for Cutmaster 42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0097, Start Cartridge
Compatible Plasma Torch SL40 for CUTMASTER 42
Thermal Dynamics Start Cartridge For SL60/100 Plasma Torch
Thermal Dynamics Start Cartridge For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8213, Start Cartridge
Compatible Plasma Torches:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100