Shop
Showing all 20 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Jackson F30 34-40 Acetate Face Shields 15-1/2″ X 9″
Jackson F30 34-40 Acetate Face Shields 15-1/2″ X 9″
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Jackson F50 34-63 IRUV 3.0 Polycarbonate Face Shield 15-1/2″ X 8″
Jackson F50 34-63 IRUV 3.0 Polycarbonate Face Shield 15-1/2″ X 8″
Jackson F50 34-65 IRUV 5.0 Polycarbonate Faceshield 15-1/2″ X 8″
Jackson F50 34-65 IRUV 5.0 Polycarbonate Faceshield 15-1/2″ X 8″
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
Jackson Passive Welding Helmet Shade Green 10
Jackson Passive Welding Helmet Shade Green 10
JACKSON SAFETY* W10 HSL 100 PASSIVE WELDING HELMET
When you need a basic welding helmet to protect your eyes and head, the Jackson Safety Fixed Shade Welding Helmet (W10 HSL 100) is a smart bet. It’s an economical way for students, welding hobbyists, professionals and inspectors to get what they need to stay safe. The Jackson Black HSL100 welding mask has a narrow shell design that’s perfect for work in tight spaces, and the helmet’s extended front increases throat protection against sparks, slag, and fumes, whether you’re working on mig welding, tig welding or arc welding. The lightweight design is made for comfort, with a large viewing area (for a clear, unobstructed view of the weld puddle) and padded head strap. The durable shield comes complete with cover plate and shade 10 polycarbonate filter plate. For the cost-conscious welder who’s ready for a terrific starter helmet, this Jackson Safety Fixed Shade 10 Welding Helmet is a smart choice.
· The welding mask has an extended front, which increases throat protection from sparks, slag, fumes and other physical hazards
· This durable shield is hard hat adaptable, comfortable and offers a large field of view for a clear view of the weld puddle (for use in mig welding, arc welding and tig welding)
· The standard shade 10 filter plate and cover plates installed at factory, but it’s adaptable to upgraded Jackson Safety ADFs like Insight, NexGen, and TrueSight II
· Meets ANSI Z87.1 – standards and is CSA compliant
Jackson V30 Nemesis Anti-Scratch Blue-Mirror Lens Wraparound Safety Glasses
Jackson V30 Nemesis Anti-Scratch Blue-Mirror Lens Wraparound Safety Glasses
Jackson V30 Nemesis Anti-Scratch Bronze Lens Wraparound Safety Glasses
Jackson V30 Nemesis Anti-Scratch Bronze Lens Wraparound Safety Glasses
Jackson V30 Nemesis Clear Lens Safety Glasses
Jackson V30 Nemesis Clear Lens Safety Glasses
Jackson V60 Nemesis RX 2.0 Diopter Safety Eyewear Clear Lens
Jackson V60 Nemesis RX 2.0 Diopter Safety Eyewear Clear Lens
Jackson V30 Nemesis Clear Indoor/Outdoor Safety Glasses
Jackson V30 Nemesis Clear Indoor/Outdoor Safety Glasses
Jackson 3002515 HSL-100 Nexgen EQC Helmet
Jackson 3002515 HSL-100 Nexgen EQC Helmet
Jackson Hunstman 490P Fiber Shell Welding Helmet
Jackson Hunstman 490P Fiber Shell Welding Helmet
JACKSON SAFETY* W20 490P Fiber Shell Welding Helmet
The Jackson Safety 490P Fiber Shell Welding Helmet features a lightweight, vulcanized fiber shell for comfortable, yet cool, heavy-duty welding. The helmet meets ANSI Z87.1-2010 standards. Though it isn’t suited for damp areas or overhead welding, it’s made of 10% recycled fiber content and the safety plate measures 2 x 4.25 inches, so you have a generous viewing area. The built-in quick-slide filter plate holder is ideal for tight work environments. The W20 Series Specialty Welding Helmets are ideal for special welding applications, whether you’re in a high heat environment, welding in a tight space or need a lightweight alternative to a bulky welding helmet.
· Made of 10% recycled fiber content
· Not suited for damp environments or overhead welding
· Quick-slide filter plate holder is ideal for tight work environments
· Meets ANSI Z87.1-2010 standards