Shop
Showing all 11 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
1,000# Standard Duty 4-in-1 Utility Clamp
1,000# Standard Duty 4-in-1 Utility Clamp
The 4-in-1 Utility Clamping System is the most versatile Sliding Arm Clamps in the market.
The three piece 4-in-1 Clamp Kit includes:
▪ Sliding Arm Clamp
▪ Extended Block
▪ V-Pad
All Strong Hand Tools® Utility Clamps are made of high quality heat treated steel and nickel/chrome plated for strength and durability.
Specifications:
- 1,000 lbs. Clamping Pressure
- 6 1/2” Capacity
- Throat Depth 4 ¾”
- Weight 2.4 lbs.
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
2,400# Heavy Duty 4-in-1 Utility Clamp
2,400# Heavy Duty 4-in-1 Utility Clamp
The 4-in-1 Utility Clamping System is the most versatile Sliding Arm Clamps in the market.
The three piece 4-in-1 Clamp Kit includes:
- Sliding Arm Clamp
- Extended Block
- V-Pad
All Strong Hand Tools® Utility Clamps are made of high quality heat treated steel and nickel/chrome plated for strength and durability.
Specifications:
- 2,400 lbs. Clamping Pressure
- Capacity 12 ½”
- Throat Depth 5 1/2:”
- Weight 7 lbs.
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
StrongHand Tools Rhino Cart Mobile Fixturing Station
StrongHand Tools Rhino Cart Mobile Fixturing Station
Charge right through your next fab project!
It’s a jungle out there . . . be ready to handle any build, repair, or assembly job with the New Rhino Cart Mobile Fixturing Station. Quickly clamp and fixture at any point on the surface, store your tools, and charge right through your projects!
The StrongHands Rhino Cart Welding table comes complete with both the table and a 66 piece fixture kit.
Features:
Specifications:
- Hole Diameter: 5/8″
- Grid Pattern: 2″ x 2″
- Tabletop Size: 48″ x 30″
- Tabletop Thickness: 5/8″
- Table Height: 36″
- Static Loading Capacity: 1,500 lb
- Package Weight: 425 lb
StrongHand Tools MiniMagnet 6 pack
StrongHand Tools MiniMagnet 6 pack
At just 2-5/16″ in height, Mini Magnets provide low profile holding of stock in tight, hard to reach areas.
Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
Perfect for use around the shop, and compact enough to carry along for use out in the field
Specifications:
▪ Package: 6-Pack
▪ Angles: 30°, 60°, 45°, 90°
▪ Max. Pull Force: 25 LBS
▪ Dimensions: 2-5/16 x 2 x 5/8″
▪ Weight: 1.7 LBS
4,800# Heavy Duty 4-in-1 Utility Clamp
4,800# Heavy Duty 4-in-1 Utility Clamp
The 4-in-1 Utility Clamping System is the most versatile Sliding Arm Clamps in the market.
The three piece 4-in-1 Clamp Kit includes:
▪ Sliding Arm Clamp
▪ Extended Block
▪ V-Pad
All Strong Hand Tools® Utility Clamps are made of high quality heat treated steel and nickel/chrome plated for strength and durability.
Specifications:
- 4,800 lbs. Clamping Pressure
- 12 ½” Capacity
- Throat Depth 7”
- Weight 12.3 lbs.