Shop
Showing all 8 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Strong Hand Welding Magnet – Heavy Duty On/Off
Strong Hand Welding Magnet – Heavy Duty On/Off
Strong Hand® Welding Magnet – Adjust O Heavy Duty On/Off Magnet MSA46-HD
Strong Hand® MSA46-HD Adjust O Heavy Duty On/Off Welding Magnet has patented ON/OFF switch, making positioning easier and safer. Comes in two sizes.
Features
- Easy safe setup: switch off, setup, switch on
- Simple to clean, switch off then wipe away
- Ideal for round and square tubing, angle & flat bar
- Hold work pieces at 45° and 90°
- Heavy Duty for industrial applicationsSpecs
- Medium: Pull – 65lbs (36 Kg), Weight – 1.5 lbs (0.7 Kg)
- Large: Pull – 160 lbs (64 Kg), Weight – 3.0 lbs (1.4 Kg)
Alcotec ER4043 Aluminum TIG Rod
Alcotec ER4043 Aluminum TIG Rod
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. Almigweld and altigweld 4043 can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is less sensitive to weld cracking and produces brighter, almost smut free welds.
Typical Applications
Welding Filler Wire
Spray and Flame Metallizing Wire
General Information
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi5
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
Valtra Strong Hand Tools® 8 1/2″
Valtra Strong Hand Tools® 8 1/2″
Features
- 4-in-1 Clamping System – ONE Clamp, FOUR functions
- Sliding Arm Clamp with the Removable/Reversible Clamp Arm and Unique Accessories
- The 4-in-1 Utility Clamping System is the most versatile Sliding Arm Clamps in the market
- All Strong Hand Tools® Utility Clamps are made of high quality heat treated steel and nickel/chrome plated for strength and durability
- Capacity 8 1/2″
- Throat Depth 5 1/2″
- Clamping Pressure 2,400 lb
- Standard Pads
- Rail Size 1 3/16 X 9/16″
- Tapped Hole 3/8-16
Includes
- Sliding Arm Clamp
- Extended Block
- V-Pad