Shop
Showing 1–20 of 59 results
Best Welds Single Line Welding Hoses, 1/4″ Oxygen, T Grade
Best Welds Single Line Welding Hoses, 1/4″ Oxygen, T Grade
Best Welds 4″ X 5″ Clear Welding Helmet Lenes
Best Welds 4″ X 5″ Clear Welding Helmet Lenes
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Self-Insulated MIG Gun Nozzles, 1/2 in Bore, 1/8 in Recess
Compatible with MIG Guns:
· Tweco 135Amp Mini
· Tweco No. 1
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco HD22 Series 200 Amp brass gas diffuser for 200amp air-cooled MIG Guns
Tweco 300 Amp Copper Ground Clamp
Tweco 300 Amp Copper Ground Clamp
Genuine Tweco® Professional Copper Ground Clamp with Ball-Point Cable Connection
Features
· Copper cast upper and lower jaws
· Insulated Spring
· Heavy Duty Spring providing the clamping force to the work surface
Specifications
· Material Composition: Copper Casting
· Amperage Capacity: 300
· Jaw Opening Depth: 4″
· Applications: Light Duty Metal Fabrication
· Overall Length: 8.5″
· Type Of Cable Connection: Ball-Point thru 3/0
· Style: Ground Device Clamp
· Jaw Opening: 1.5″
· Processes: SMAW, SAW, GMAW, FCAW, GTAW
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD 22 Series Air Cooled Nozzles for Classic No. 2, Spray Master 250, and Smoke Master 250 MIG guns are self insulated and compatible with HD52 Series Gas Diffusers.
Compatible with Tweco MIG guns:
- Classic No. 2
- Spray master 250
- Smoke Master 250
Features:
- Used in heavy duty welding application up to 250 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allows and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- 3-piece design – does not require an additional insulator
Specifications:
- Inside Diameter: 1/2″
- Style: Slip-On
- Nozzle/Contact Tip Relationship: 1/8″ – 5/32″ Tip recess
- Outside Diameter: .875″
Tweco .035 Velocity Contact Tip
Tweco .035 Velocity Contact Tip
Tweco Model VTS-35 .035” Velocity Series Contact Tip
Compatible with Tweco Fusion Series MIG Guns
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 14-30 .030” 14 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #2
▪ Professional #3
▪ Professional #4
▪ Spray Master Series MIG Guns
Best Welds .035 Miller Style Contact Tip
Best Welds .035 Miller Style Contact Tip
Best Welds, Miller Model 000068 .035”, Replacement Contact Tip.
Replacement tip designed for .035 inch (0.8 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Best Welds .030 Miller Style Contact Tip
Best Welds .030 Miller Style Contact Tip
Best Welds, Miller Model 000067 .030” Replacement Contact Tip.
Replacement tip designed for .030 inch (0.9 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Best Welds .030-.035 Tweco Conduit
Best Welds .030-.035 Tweco Conduit
Best Welds Tweco Model 42-30-35-15 .030” – .035” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #1
▪ Professional #2
Best Welds 125 Amp Air Cooled TIG Torch Flex w/Valve Head
Best Welds 125 Amp Air Cooled TIG Torch Flex w/Valve Head
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds 21-62 Self-Insulated MIG Gun Nozzles
Best Welds Tweco style 21 Series 5/8” self-insulated MIG gun nozzles with 1/8” recess.
- Used in light to medium duty welding application up to 180 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut and Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allow and machining the internal threads to match the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- Tapered nozzle 3-piece design – does not require an additional insulator
- Nozzle threads onto the gas diffuser
Nozzle is compatible with:
▪ Tweco Mini
▪ Tweco No 1
▪ Best Welds 135
Best Welds .035 11 Series Tweco Style Standard Duty Contact Tip
Best Welds .035 11 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 11-35 .035” 11 Series Standard Duty Contact Tip.
Compatible with Tweco Professional #1, and Spray Master Series MIG Guns