Shop
Showing all 7 results
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
CK Worldwide 1.5% Lanthanated Tungsten 1/8″ X 7″
3/32” X 7” Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated.
These electrodes have excellent arc starting, a low burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
- AWS A5.12 EWLa-1.5
- ISO 6848 WL15
Mathey Dearmon 1- 2 1/2 quick fit clamps
Mathey Dearmon 1- 2 1/2 quick fit clamps
The Mathey Dearmon Quik-fit clamp offers the simplest method of achieving quick, easy and precise fit ups. The Quik-fit is a compact tack-type clamp that is easy to use in close quarters. Quik –fit is available in 3 sizes to cover a range of 1”-12” pipe, and can be used on either carbon or stainless steel without adding special shoes or screws. The clamp aligns pipe or pipe to fitting, and is ideal for alignment applications where reforming is not needed.
Features:
- Rugged- Built for years of service
- Lightweight- easy to use in overhead work
- Covers 1”- 2” pipe
- Fast- smooth, quick action for rapid fit ups
CK Worldwide FX TIG Torch Pkg 130A Flex, 25′ 1pc SuperFlex
CK Worldwide FX TIG Torch Pkg 130A Flex, 25′ 1pc SuperFlex
CK 130 Air-Cooled SuperFlex TIG Torch Package
130 Amp Air-Cooled 2-series TIG Torch from CK Worldwide.
What’s Included:
· CK130 TIG Torch with Flex Head
· 1 piece of cable 25′