Shop
Showing all 13 results
Fox Fire Abrasive Disc Conditioner
Fox Fire Abrasive Disc Conditioner
FOXFIRE Abrasive Conditioner
FOXFIRE™ is a revolutionary new grinding lubricant formulated to dramatically extend the life of abrasives and make grinding easier. FOXFIRE™ is a white, extra dry solid that is very clean to use. When applied to an abrasive surface, friction from grinding causes the FOXFIRE™ coating to melt, liquefy and act as a lubricant and release agent. Materials being ground do not load or clog cutting surfaces so abrasives run cooler and last longer. Unlike beeswax or petroleum based products, FOXFIRE™ is not sticky and parts can be blown clean.
FOXFIRE™ works best for grinding aluminum or plastic, removing automotive paint, or any other material that can melt into or clog abrasive surfaces. Discs or belts treated with FOXFIRE™ last longer… up to twenty times longer when grinding aluminum. Abrasive wheel cut off blades treated with FOXFIRE™ cut aluminum like butter without build-up on the cutting wheel. FOXFIRE™ also extends the life of abrasives used to grind stainless steel and carbon steel and leaves no residue that can affect welds made after grinding. In addition, FOXFIRE™ works well on saw blades, taps, drill bits and many other applications where a lubricant or release agent is needed or liquid coolant cannot be used.
Benefits:
▪ FOXFIRE™ increases productivity
▪ Non-toxic and safe
▪ Abrasives stay sharp much longer and cut faster
▪ Time once spent changing discs or belts can be used for grinding
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco Gas Diffuser For Up To 250A SprayMaster Series MIG Guns
Tweco HD22 Series 200 Amp brass gas diffuser for 200amp air-cooled MIG Guns
Tweco 300 Amp Copper Ground Clamp
Tweco 300 Amp Copper Ground Clamp
Genuine Tweco® Professional Copper Ground Clamp with Ball-Point Cable Connection
Features
· Copper cast upper and lower jaws
· Insulated Spring
· Heavy Duty Spring providing the clamping force to the work surface
Specifications
· Material Composition: Copper Casting
· Amperage Capacity: 300
· Jaw Opening Depth: 4″
· Applications: Light Duty Metal Fabrication
· Overall Length: 8.5″
· Type Of Cable Connection: Ball-Point thru 3/0
· Style: Ground Device Clamp
· Jaw Opening: 1.5″
· Processes: SMAW, SAW, GMAW, FCAW, GTAW
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD 22 Series Air Cooled Nozzles for Classic No. 2, Spray Master 250, and Smoke Master 250 MIG guns are self insulated and compatible with HD52 Series Gas Diffusers.
Compatible with Tweco MIG guns:
- Classic No. 2
- Spray master 250
- Smoke Master 250
Features:
- Used in heavy duty welding application up to 250 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allows and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- 3-piece design – does not require an additional insulator
Specifications:
- Inside Diameter: 1/2″
- Style: Slip-On
- Nozzle/Contact Tip Relationship: 1/8″ – 5/32″ Tip recess
- Outside Diameter: .875″
Tweco .035 Velocity Contact Tip
Tweco .035 Velocity Contact Tip
Tweco Model VTS-35 .035” Velocity Series Contact Tip
Compatible with Tweco Fusion Series MIG Guns
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
Tweco .035 11H Series Contact Tip For 160 – 250A No. 1, Mini-MIG-Gun And Spray Master Series MIG Guns
Tweco .035 11H Series Contact Tip For 160 – 250A No. 1, Mini-MIG-Gun And Spray Master Series MIG Guns
Tweco Model 11H-35 .035” 11H Series Heavy Duty Contact Tip
Compatible with Tweco MIG Guns:
▪ Professional #1
▪ Mini-MIG
▪ Spray Master Series
Tweco Teflon Liner 1/16″ for Tweco No 3 & No 4
Tweco Teflon Liner 1/16″ for Tweco No 3 & No 4
Tweco Model 44TF-116-15 1/16” X 15’ Teflon Liner
Compatible with MIG Guns:
▪ Professional #3
▪ Professional #4
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
TWECO Fluxcored SEFC MIG Gun
350 AMP 60% Duty cycle MIG gun with Lincoln Style rear connectors. Suitable for medium/heavy duty fabrication
Features:
- For use with all gasless wires
- High Impact-Resistant One-Piece “Straight” Handle
- Metal “Paddle” style trigger lever
- Micro-Switch Trigger Design incorporates a button style switch for start/stop wire feed
- Spare Trigger Leads in Cablehoz
- Heavy Duty design and front-end consumables
- Rugged & Duraable power Cablehoz with proven abrasion & heat ressitance
Specifications:
- Amps: 350 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: 3/32″
- Connector: Lincoln Style fits LN 7, 8, 9 , SP200
- Gas: Carbon Dioxide
Tweco Classic No. 3 .035″-.045″ Tweco Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Tweco Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Tweco Style
- Gas: Carbon Dioxide
Tweco Classic No. 2 .030″-.035″ Tweco Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Tweco Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Tweco Style
- Gas: Carbon Dioxide
Tweco Classic No. 1 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 1 .030″-.035″ Miller Style 15′ MIG Gun
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Neoprene insulated quick-change conductor tubes swivels 360 degrees.
- Enhanced direct plug capabilities.
Arc Gun Specifications:
- Amps: 180A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide