Shop
Showing 1–20 of 52 results
Lincoln Viking 3350 Series Outside Cover lens
Lincoln Viking 3350 Series Outside Cover lens
LN-25 PRO Wire Feeder Used
LN-25 PRO Wire Feeder Used
LN-25 PRO series wire feeders are designed to be simple, reliable and easy to service. Whether you are an ironworker, pipeline welder, or weld at a construction site, shipbuilding facility or metal fabrication shop, we have the right semiautomatic wire feeder for you.
• Maxtrac® Wire Drive System – Heavy-duty cast aluminum wire drive system provides reliable feeding and durability.
• Dual Range Wire Feed Speed – Delivers greater precision at low end wire feed speeds.
• Trigger Interlock Switch – Provides operator comfort for long welds.
• Replaceable and Flame Resistant Case – Rugged and durable case can be replaced in less than five minutes.
• Potted PC Boards – For moisture and corrosion protection.
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Lincoln 3.73″ X 3.53″ Inside Cover Lens For Viking 3350 Series Helmet
Lincoln 3.73″ X 3.53″ Inside Cover Lens For Viking 3350 Series Helmet
Lincoln Excalibur 8018-B2 MR
Lincoln Excalibur 8018-B2 MR
Top Features
- Designed for welding 1.25% chromium, 0.50% molybdenum steel
- Premium arc performance
- Square coating burn-off
- Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength after 8 hours of stress-relieving at 690°C (1275°F)
Typical Applications
- Power generation
- Petrochemical
- Pressure vessels
- Process piping
Welding Positions
All, except vertical down
Lincoln Viking 4C Black Welding Helmet
Lincoln Viking 4C Black Welding Helmet
FEATURES:
SPECIFICATIONS:
Lincoln .035 Tapered Contact Tip For Magnum PRO
Lincoln .035 Tapered Contact Tip For Magnum PRO
Lincoln .035” Tapered Contact Tip.
Compatible with MIG guns:
· Magnum Pro 100L
· Magnum Pro 250L
· Magnum Pro 350
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-62R, 1/8” recess, 5/8” Thread-on Welding Nozzle.
Nozzle is compatible with:
▪ Magnum PRO 250L
▪ Magnum PRO 350L
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-50R, 1/8” recess, 1/2” Thread-on Welding Nozzle
Nozzle is compatible with:
· Magnum PRO 250L
· Magnum PRO 350L
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln .035 Contact Tip For Magnum PRO MIG Guns
Lincoln .035 Contact Tip For Magnum PRO MIG Guns
Lincoln .035” Copper Plus Contact Tip.
10 per pack
Compatible with MIG guns:
· Magnum Pro 100L
· Magnum Pro 250L
· Magnum Pro 350
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Specifications
Diameter: | .035 |
Package: | 44 lb. Spool |
SKU: | LINED032366 |
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
Lincoln Power MIG 140MP Welder
Lincoln Power MIG 140MP Welder
Details
- Versatile Performance– Multiprocess unit capable of MIG welding 30-140 amps, DC TIG welding 10-120 amps, and Stick welding 25-90 amps.
- Easy to use– Simple two knob operation for controlling wire feed speed and voltage. Single button allows for easy process selection changes.
- Compact Design– Lightweight and portable at 34.5 lbs. Conveniently plugs into household 120V power.
Features
- Versatile Performance
- Easy To Use
- Compact Design
What’s Included
- Gun- Magnum PRO 100L gun and 10 ft. (3.0 m) cable assembly with brass connection and 8-pin trigger connector (K530-7). .025 in. (0.6 mm) tapered contact tips (Qty 3) .035 in. (0.9 mm) tapered contact tips (Qty. 3) Gasless nozzle for Innershield welding Gas nozzle for MIG welding Spindle adapter for 8 in. (203 mm) diameter spools .025 – .035 in. (0.6 – 0.9 mm) wire diameter dual track drive roll for MIG and flux-cored welding (KP2948-1)
- Shielding Gas Apparatus- Harris3000290 Gas Regulator (S25805) and 52 in. (1.3 m) hose (S19303) for use with Ar/CO2 blend gases. For use with CO2 shielding gas- order a Lincoln Electric S19298 CO2 shielding gas bottle adapter.
- Welding Wire- Sample spool of .025 in. (0.6 mm) diameter SuperArc L-56 premium MIG wire Sample) spool of .035 in. (0.9 mm) diameter Innershield NR-211-MP flux-cored wire
- Other- Work clamp and 10 ft. (3.0 m) cable Instruction manual Quick Start guide Electrode holder with 10 ft. cable for stick welding
K4498-1
Lincoln Outback 185 Engine Driven Welder
Lincoln Outback 185 Engine Driven Welder
Built for the Outdoors!™
The Low-Lift™ grab bars on both ends make lifting the Outback® 185 on and off truck beds easy. The compact Outback® 185 is easy to start with all engine controls on the front of the machine, and it’s easy to use for welding. Use the AC generator power for a variety of applications described below with the large 6.8 gallon (25.7 liter) fuel tank! Plug in a Lincoln Electric POWER MIG® 140C or POWER MIG® 180C for wire welding too.
- Low-Lift™ Grab Bars (Patent Pending)
- More leverage for lifting unit on and off truck beds.
- Extra protection against product damage.
- Best in class feature!
- All Engine Controls on Front Control Panel
- Easy access for starting, especially when mounted on truck beds.
- Front panel includes electric start switch and engine choke control.
- Best in class feature!
- 1-1/4 in. (32 mm) Diameter Rugged Tube Frame
- Great for all-around sturdy protection.
- Best in class feature!
- 6.8 Gallon (25.7 Liter) Fuel Tank
- Less frequent re-fueling, for extended run times.
- Large fuel fill opening for easy re-fueling too!
- Best in class feature!
- Weld with up to 5/32 in. (4 mm) Stick Electrode
- Up to 185 amps of DC output for many applications.
- 5,700 Watts Peak AC Generator Power (5,200 Watts Continuous).
- Many uses! Grinder, work lights, pump, motor starting, or emergency power.
- Plug in a Lincoln Electric POWER MIG® 140C or POWER MIG® 180C for wire welding.
- Plug in a Lincoln Electric Tomahawk® 375 Air to cut metal.
RATED OUTPUT |
|
OUTPUT RANGE |
|
GENERATOR OUTPUT |
|
TYPE OF ENGINE |
|
HP AND SPEED |
|
CYLINDERS |
|
DIMENSIONS (H X W X D) | 25.6 in x 21.8 in x 31.5 in (651 mm x 553 mm x 800 mm) |
NET WEIGHT | 295.00 (133.81 kg) |
Lincoln Fleetweld 5P+ Mild Steel Cellulosic Stick Electrode
Lincoln Fleetweld 5P+ Mild Steel Cellulosic Stick Electrode
Lincoln SuperArc LA-90 ER80S-D2/ER90S-D2/EA3K Low Alloy Steel MIG Wire .035 33# Spool
Lincoln SuperArc LA-90 ER80S-D2/ER90S-D2/EA3K Low Alloy Steel MIG Wire .035 33# Spool
Lincoln .045″ Contact Tip for Magnum PRO 250L Series MIG Guns
Lincoln .045″ Contact Tip for Magnum PRO 250L Series MIG Guns
Lincoln .045″ Copper Plus Contact Tip for 250A/350A Magnum PRO 250L Series MIG Guns 10/pk
Lincoln Aspect 375 AC/DC TIG Welder Ready-Pak
Lincoln Aspect 375 AC/DC TIG Welder Ready-Pak
ADVANCED TECHNOLOGY MADE SIMPLE
A quality weld is always important. In some industries and applications, lives may even depend on it. If this is the challenge you face every day, choose a TIG welding machine that meets the demanding quality standards of the aerospace, motorsports, shipbuilding, education and fabrication industries.
The Aspect® 375 is the perfect choice for mission critical welds, especially on applications that must stand up to the most rigorous testing requirements.
AUTO OR MANUAL: THE CHOICE IS YOURS
Effortless arc control
Extremely fast arc response and stability for the smoothest and most efficient weld possible.
Simplicity when you want it
Activate Intellistart™ technology to automatically provide for softer starts and minimal distortion on thinner materials and hotter starts required for thicker materials. Optional AC Auto Balance® technology offers simplicity by automatically providing the optimal mix of cleaning and penetration when welding aluminum.
Customization when you need it
AC Wave Shape control enables you to customize the arc for critical aluminum welding requiring:
- A higher degree of penetration on thicker materials.
- Increased cleaning action in breaking through heavy oxide layers.
- Narrower arc profile enhancing control around corners and other tight configurations.
LINK3946-2
Package Includes:
- CoolArc 47 Water Cooling System
- Inverter Cart
- 20H-320-25R Water Cooled TIG Torch with 25 ft. (7.6m) cable assembly
- Zippered Torch Cable Cover 25 ft. (7.6 m)
- Twist Mate™ Torch Adapter Water-Cooled
- Parts Kit for 20H-320-25R Water Cooled TIG Torch contains: long back cap, 1/16 in., 3/32 in., 1/8 in. collets, 1/16 in., 3/32 in., 1/8 in. collet bodies, 1/16 in., 3/32 in., 1/8 in. 2% Ceriated tungsten, and three Alumina nozzles (5/16 in., 3/8 in., 7/16 in. orifices)
- Two Gallons of Low Conductivity Coolant
- Foot Amptrol™ with 25 ft. (7.6 m) cable assembly
- Gas Regulator/Flowmeter and 10 ft. (3.0 m) Hose Kit
- 15 ft. Work Lead Assembly
- 10 ft. (3m) input power cord