Shop
Showing 1–20 of 31 results
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamics 40 Amp Drag Tip for Cutmaster42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0093 40 Amp Drag Tip
Compatible with:
▪ CUTMASTER 42
▪ SL40
Thermal Dynamics Extra Cool Torch Coolant
Thermal Dynamics Extra Cool Torch Coolant
Thermal Dynamic 1 Gallon Red Extra Cool 7-3580 Propylene Glycol Torch Coolant Formulated using de-ionized water, Resistance value of 0.4 mega ohm/cm or greater to prevent the coolant from carrying an electrical current. 70/30 coolant mixture, Resists freezing to +10 deg F (-12 deg C) Water soluble 1 specific gravity, 5.5 – 7 pH value
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamics 30 Amp Drag Tip For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8206, 30 Amp Drag Tip.
Compatible with:
▪ Cutmaster 52
▪ Cutmaster 82
▪ Cutmaster 102
▪ Cutmaster 152
▪ SL60
▪ SL100
Thermal Dynamics 100 Amp Nitrogen Marked Standard Electrode For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Nitrogen Marked Standard Electrode For XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1089, 100 Amp Nitrogen Marked Standard Electrode
Compatible with XT-301 Plasma Torch
Thermal Dynamics 40 Amp Electrode for PCH-125/PCM-125 Plasma Torch
Thermal Dynamics 40 Amp Electrode for PCH-125/PCM-125 Plasma Torch
Thermal Dynamics Brand, Model 9-6542, 40 Amp Electrode
Compatible with PCH-125 & PCM-125 plasma torch.
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamics 80 Amp Standoff Tip for SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8211, 80 Amp Tip
Compatible with:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics 55-100 Amp Shield Gas Distributor for XT-301 Plasma Torch
Thermal Dynamics 55-100 Amp Shield Gas Distributor for XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1272, 55 – 100 Amp Shield Gas Distributor
Compatible Plasma Torch is XT-301
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics Brand, Model 9-8215, 30 – 120 Amp Electrode
Compatible with Plasma Torch:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamic Brand, Model 35-1053 100 Amp Air/Oxygen Tip
Compatible with XT-301 plasma torch.
Cutmaster 60i Thermal Dynamics Plasma Cutter
Cutmaster 60i Thermal Dynamics Plasma Cutter
Featured:
- Built for portability and durability with the integral multi-handle design, available in either a 1 phase or 3 phase unit
- 50% Duty Cycle at 60A with automatic multi-voltage detection from 208-480V
- Industrial SL60QD 1Torch quick disconnect with ATC® (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok® technology
- Up to 3/4 in. (20 mm) recommended cut capacity with maximum sever of 1-1/2 in. (38 mm) and 3/4 in. (20 mm) pierce capability
- High-visibility, oversized display with gas optimizer technology and consumables end-of-life indicator, makes setup and usage simple and productive
- Cutmaster Black Series electrode included for up to 60% longer life of consumable parts
- Industry leading 4-year warranty on power supply and 1-year warranty on torch
THD1-5630-1
Cutmaster 82 Thermal Dynamics Plasma Cutter
Cutmaster 82 Thermal Dynamics Plasma Cutter
Featured:
- Front Panel LEDs indicate status conditions for maximum efficiency
- Storage compartment for convenient access to spare parts and consumables.
- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions or convert to a machine torch.
- True Guard roll bar provides easy transportation and protection for unmatched durability.
- Multi-voltage allows operation from 208 to 480 Volts in a single power supply.
- Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
- Lighter weight design for maximum portability
PERFORMANCE
- Maximum Cut – 1 1/2″ (40 mm)
- Recommended Cut – 3/4″ (20 mm)
- Pierce Rating – 5/8″ (15 mm)
- Max Amperage Output – 80A
- Output Power – 9 kW
DIMENSIONS
- 12″ W x 15″ H x 24″ D (305 mm x 381 mm x 610 mm)
WEIGHT
- 43 lbs (19.5 kg)
TORCH
- SL60
- Air Pressure – 70 psi (4.8 bar)
- 6.7 cfm (190 l/m)
INPUT VOLTAGE
- 208-230/460V, 1/3 ph, 50/60 Hz
- 400V, 3 ph, 50 Hz
- 600V, 3 ph, 50/60 Hz
DUTY CYCLE (@ 40º C)
- 40% @ 80A
- 60% @ 65A
- 100% @ 55A
AMPERAGE DRAW
- 72A @ 230V, 1 ph
- 39A @ 230V, 3 ph
- 21A @ 460V, 3 ph
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8236, 70 – 100 Amp Drag Shield Cap
Compatible:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100 Plasma Torch
Kimberly-Clark Kleenguard A20 Breathable Particle Protection Coveralls
Kimberly-Clark Kleenguard A20 Breathable Particle Protection Coveralls
FEATURES & BENEFITS
Kleenguard A20 Breathable Particle Protection Coveralls with Hood and Boots are designed to move with you – and your employees – while protecting against hazardous and non-hazardous dust. These protective garments offer superior particle holdout coupled with unmatched comfort attributes. The A20 fabric is comprised of five layers of stacked barrier protection (SMMMS) against hazardous particles. Features to provide more protection include the seamless front (for primary exposure area), 1 inch zipper flap, hood, boots and elastic back, wrists and ankles. They feature Reflex design, which offers excellent fit (with elastic back) and freedom of movement. The seamless front provides more protection to the primary exposure area. They are a popular choice for dusty environments such as laboratories and remediation, as well as pesticide applications and as decontamination modesty garments.
· Kleenguard A20 are designed to protect against dirt, grime and dust and are made with breathable Microforce barrier fabric
· Reflex Coverall Design offers excellent fit and freedom of movement (also includes hood, boots, elastic back, zipper with 1″
Proto Rolling Head Bar, Hex, 5/8″ Straight Tapered Tip
Proto Rolling Head Bar, Hex, 5/8″ Straight Tapered Tip
Thermal Dynamics Start Cartridge for Cutmaster 42 Plasma Cutter
Thermal Dynamics Start Cartridge for Cutmaster 42 Plasma Cutter
Thermal Dynamic Brand, Model 9-0097, Start Cartridge
Compatible Plasma Torch SL40 for CUTMASTER 42
Thermal Dynamics Start Cartridge For SL60/100 Plasma Torch
Thermal Dynamics Start Cartridge For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8213, Start Cartridge
Compatible Plasma Torches:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics Stand-Off Guide For Cutmaster 52/82/102/152 Plasma Torch
Thermal Dynamics Stand-Off Guide For Cutmaster 52/82/102/152 Plasma Torch
Thermal Dynamic Brand, Model 9-8281, Stand-Off Guide
Compatible Plasma Torches:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100
Thermal Dynamics Stand-Off Guide For PCH-75 Plasma Torch
Thermal Dynamics Stand-Off Guide For PCH-75 Plasma Torch
Thermal Dynamics Brand, Model 8-7575, Stand-Off Guide
Compatible Plasma Torches: PCH-75
Thermal Dynamics 55-100 Amp Shield Cap For XT-301 Plasma Torch
Thermal Dynamics 55-100 Amp Shield Cap For XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1034, 55 – 100 Amp Shield Cap
Compatible Plasma Torch is XT-301
Thermal Dynamics Shield Cup For PCH-75/100XL/PCM-75/100XL Plasma Torch
Thermal Dynamics Shield Cup For PCH-75/100XL/PCM-75/100XL Plasma Torch
Thermal Dynamic Brand, Model 8-7500, Shield Cup
Compatible Plasma Torches:
▪ PCH-75
▪ PCH-100XL
▪ PCM-75
▪ PCM-100XL