Shop
Showing 1–20 of 144 results
Lincoln Viking 3350 Series Outside Cover lens
Lincoln Viking 3350 Series Outside Cover lens
LN-25 PRO Wire Feeder Used
LN-25 PRO Wire Feeder Used
LN-25 PRO series wire feeders are designed to be simple, reliable and easy to service. Whether you are an ironworker, pipeline welder, or weld at a construction site, shipbuilding facility or metal fabrication shop, we have the right semiautomatic wire feeder for you.
• Maxtrac® Wire Drive System – Heavy-duty cast aluminum wire drive system provides reliable feeding and durability.
• Dual Range Wire Feed Speed – Delivers greater precision at low end wire feed speeds.
• Trigger Interlock Switch – Provides operator comfort for long welds.
• Replaceable and Flame Resistant Case – Rugged and durable case can be replaced in less than five minutes.
• Potted PC Boards – For moisture and corrosion protection.
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Weldmark 3/32″ TIG Gas Lens Collet Body For HW-9,20,20H,24W,25 Torches
Weldmark 3/32″ TIG Gas Lens Collet Body For HW-9,20,20H,24W,25 Torches
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 TIG Rod
Weldmark is a premium carbon steel multiple deoxidized wire. Produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2
Weldmark ER4043 Aluminum TIG Rod 1# tube
Weldmark ER4043 Aluminum TIG Rod 1# tube
4043 is a general purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloy contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. ER4043 can be used to weld various grades of aluminum.
AWS Class: ER4043 | Certification: AWS A5.10/ A5.10M:1999 |
Alloy: ER4043 | AWS/ASME SFA A5.10 |
Weldmark TIG Medium Size Back Cap For HW-20, HW-9 Torches
Weldmark TIG Medium Size Back Cap For HW-20, HW-9 Torches
Lincoln 3.73″ X 3.53″ Inside Cover Lens For Viking 3350 Series Helmet
Lincoln 3.73″ X 3.53″ Inside Cover Lens For Viking 3350 Series Helmet
Strong Hand Welding Magnet – Heavy Duty On/Off
Strong Hand Welding Magnet – Heavy Duty On/Off
Strong Hand® Welding Magnet – Adjust O Heavy Duty On/Off Magnet MSA46-HD
Strong Hand® MSA46-HD Adjust O Heavy Duty On/Off Welding Magnet has patented ON/OFF switch, making positioning easier and safer. Comes in two sizes.
Features
- Easy safe setup: switch off, setup, switch on
- Simple to clean, switch off then wipe away
- Ideal for round and square tubing, angle & flat bar
- Hold work pieces at 45° and 90°
- Heavy Duty for industrial applicationsSpecs
- Medium: Pull – 65lbs (36 Kg), Weight – 1.5 lbs (0.7 Kg)
- Large: Pull – 160 lbs (64 Kg), Weight – 3.0 lbs (1.4 Kg)
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Tungsten Electrode 3/32” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark by Victor Purging Regulator
Weldmark by Victor single-stage purging regulator features a durable forged brass body and cap with a high delivery pressure. They also feature easy-to-read gauges, and a stem-type seat mechanism for accurate gas flow.
Primarily used by HVAC professionals for nitrogen purging. May be used with helium, argon, co2 or any other inert gas.
Specifications:
- Gas Service: Inert Gas
- CGA: 580
- Outlet Connection: ¼”-37
- Delivery Pressure: 500 psig
- Max Inlet Pressure: 3000 psig
Lincoln Excalibur 8018-B2 MR
Lincoln Excalibur 8018-B2 MR
Top Features
- Designed for welding 1.25% chromium, 0.50% molybdenum steel
- Premium arc performance
- Square coating burn-off
- Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength after 8 hours of stress-relieving at 690°C (1275°F)
Typical Applications
- Power generation
- Petrochemical
- Pressure vessels
- Process piping
Welding Positions
All, except vertical down
Lincoln Viking 4C Black Welding Helmet
Lincoln Viking 4C Black Welding Helmet
FEATURES:
SPECIFICATIONS:
Weldmark 300 Amp Ground Clamp with Copper Flat Jaw
Weldmark 300 Amp Ground Clamp with Copper Flat Jaw
Weldmark Copper Ground Clamp – 300 Amp
Features
· Copper cast upper and lower jaws
· Insulated Spring
· Heavy Duty Spring providing the clamping force to the work surface
Specifications
· Material Composition: Copper Casting
· Amperage Capacity: 300
· Jaw Opening Depth: 4″
· Applications: Light Duty Metal Fabrication
· Overall Length: 8.5″
· Cable Connection: Ball-Point thru 3/0
· Jaw Opening: 1.5″
· Process(es): SMAW, SAW, GMAW, FCAW, GTAW
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor Regulator Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested