Shop
Showing all 9 results
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 06-B 458 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 80
• Shape: Flat
• Max RPM: 13,300
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 403-20-116 1/16″ TOUGH LOCK™ Heavy Duty Contact Tip
- For 1/16″ (1.6 mm) wire
- Locking feature prevents contact tip and retaining head from overheating due to the loosening vibration often causes – cooler temperatures reduces wear and extends consumable life
- Greater Surface area contact between the contact tip, retaining head and neck ensures better heat dissipation and guarantees positive electrical conductivity
Walter E-Weld Weld Spatter Release Emulsion
Walter E-Weld Weld Spatter Release Emulsion
- Anti-Spatter Emulsion: the e-weld cleaning solution protects the work surfaces from weld spatters, thus saving you from time-consuming and costly rework. The anti-spatter solution prevents weld porosity and ceases weld cracks
- High-Performance: a safe and natural solution, the weld spatter emulsion does not interfere with paint adhesion, allowing you to do immediate painting with no surface damage. Just a thin protective coat of e-weld solution prevents spatter adhesion
- Applications: the weld spatter cleaner is used in general-purpose welding for protecting workpieces, torches, robots and jigs. The spatter cleaning solution can be effectively applied on all weldable metals
- Non-Flammable: the e-welding solution is formulated using natural extracts. This spatter release emulsion is VOC free and does not contain any harmful solvent or silicone substances
- Specifications: the anti-spatter solution comes in a 20L container. You can use a refillable sprayer for ultra-fine and uniform distribution. The anti-spatter has a green color for better view on workpieces
Tregaskiss Liner .035-.045 X 15′
Tregaskiss Liner .035-.045 X 15′
Tregaskiss Model 415-45-03 .035” – 3/64” X 15’ Liner
Compatible with MIG Guns:
▪ Tregaskiss MIG guns
▪ Bernard BTB
▪ Bernard TGX
▪ Bernard T-Gun
▪ Clean Air Fume Extraction
Tregaskiss 8″ Bronze Jump Liner for .030″ – 1/16″ Wire
Tregaskiss 8″ Bronze Jump Liner for .030″ – 1/16″ Wire
Tregaskiss™ Conventional Liners for MIG welding guns are made of high carbon music wire for smooth wire feed and long life.
Tregaskiss Model 415-25 conventional polymer liners for aluminum wire for 0.030″ – 1/16″ wire, 8″ length; bronze jump liner for use with liner
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 08-B 462 HP Combo Wheel
The Walter high performance all in one cutting and grinding 1/8” wheels set new standards for performance in combined depressed center wheels (for portable angle grinders). They are specially reinforced to withstand the stress in off-hand cutting operations. Whether cutting, grooving, notching or light grinding, these wheels are guaranteed to give you the longest wheel life, fastest material removal and maximum safety.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting, Grooving, Notching or Light Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inch
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 13,300
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 06-B 454 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Flat
• Max RPM: 13,300
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 11-T-142 Zip Cut-Off Wheel
Faster, cooler, freer cutting and heavily reinforced for added safety, zip-wheel provides premium performance while resisting twisting and bending. This allows for a true, straight cut every time. The end result is a wheel that improves worker safety while delivering the lowest cost-per-cut in the industry.
• Abrasive: Aluminm Oxide
• Workpiece Materials: Steel, Cast Iron, Stainless Steel, Sheet Metal
• Diameter: 4 1/2 Inches
• Thickness: 3/64 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Depressed Center
• Max RPM: 13,300