Shop
Showing all 18 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030” – .035’” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Roughneck
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 14-30 .030” 14 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #2
▪ Professional #3
▪ Professional #4
▪ Spray Master Series MIG Guns
Best Welds .030 Miller Style Contact Tip
Best Welds .030 Miller Style Contact Tip
Best Welds, Miller Model 000067 .030” Replacement Contact Tip.
Replacement tip designed for .030 inch (0.9 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63105 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
• Abrasive: Aluminum Oxide
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting of sections and solid material
• Diameter: 5 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 12,200
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds Tweco Style 11 Series .030 Tapered Contact Tip
Compatible with:
- Anchor Brad 135 Gun
- Best Welds® 135 Gun
- Tweco® Mini ®
- Tweco No.1 Gun
Lincoln Super Arc L-50 ER70S-3 Copper Coated Carbon Steel MIG Wire .030 33# Spool
Lincoln Super Arc L-50 ER70S-3 Copper Coated Carbon Steel MIG Wire .030 33# Spool
Specifications
| Diameter: | .030 |
| Package: | 33 lb. Spool |
| SKU: | LINED031407 |
Best Welds .030 11 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 11 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 11-30 .030” 11 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #1
▪ Spray Master Series MIG Guns
Pferd 5″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 5″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61003 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 5 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Centre
▪ Max RPM: 12,200
Pferd Fibre Disc Aluminum Oxide 36 Grit
Pferd Fibre Disc Aluminum Oxide 36 Grit
Aluminum Oxide A – Standard (Plain Arbor Hole)
Specifications:
|
Diameter: |
4-1/2″ 5″ |
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 5″ X .045 Cut-off Wheel, 7/8″Ah – Type 27
Pferd 5″ X .045 Cut-off Wheel, 7/8″Ah – Type 27
Pferd 63163 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
▪ Abrasive: Aluminum Oxide
▪ Workpiece Materials: Steel, Cast Iron
▪ Application: Cutting of sections and solid material
▪ Diameter: 5 Inches
▪ Thickness: .045 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 46
▪ Shape: Depressed Center
▪ Max RPM: 12,200