Shop
Showing 1–20 of 23 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030-.035 Contact Tip For Roughneck, Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .030” – .035’” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Roughneck
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 14 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 14-30 .030” 14 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #2
▪ Professional #3
▪ Professional #4
▪ Spray Master Series MIG Guns
Best Welds .030 Miller Style Contact Tip
Best Welds .030 Miller Style Contact Tip
Best Welds, Miller Model 000067 .030” Replacement Contact Tip.
Replacement tip designed for .030 inch (0.9 mm) solid or flux-cored welding wires. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69865 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
Performance Line SG – ZA 30 S SG – For steel/cast iron – Depressed center
- Abrasive: Zirconia Alumina
- Workpiece Materials: Steel, cast iron (grey and nodular types)
- Application: Weld grinding, edge grinding
- Recommendation for Use: Provides optimum grinding results on high power pneumatic or electric angle grinders and high-frequency grinders.
- 5/16” thick discs provide additional strength and service life for heavy-duty applications.
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds Tweco Style 11 Series .030 Tapered Contact Tip
Compatible with:
- Anchor Brad 135 Gun
- Best Welds® 135 Gun
- Tweco® Mini ®
- Tweco No.1 Gun
Lincoln Super Arc L-50 ER70S-3 Copper Coated Carbon Steel MIG Wire .030 33# Spool
Lincoln Super Arc L-50 ER70S-3 Copper Coated Carbon Steel MIG Wire .030 33# Spool
Specifications
Diameter: | .030 |
Package: | 33 lb. Spool |
SKU: | LINED031407 |
Best Welds .030 11 Series Tweco Style Standard Duty Contact Tip
Best Welds .030 11 Series Tweco Style Standard Duty Contact Tip
Best Welds, Tweco Model 11-30 .030” 11 Series Standard Duty Contact Tip.
Compatible with Tweco:
▪ Professional #1
▪ Spray Master Series MIG Guns
Pferd 6″ .020 Stainless Steel Wire Stringer Bead Twist Knot Wheel
Pferd 6″ .020 Stainless Steel Wire Stringer Bead Twist Knot Wheel
Threaded Wheel Brushes – Stringer Bead Twist Knot Wheel
Stringer bead knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is designed for controlled, confined surface contact area. Ideal for root and hot pass weld cleaning applications requiring the most aggressive brushing action.
For optimal performance use on angle grinders.
Specifications:
Diameter: | 6″ |
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 63071 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 10,200
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 63057 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 60
▪ Shape: Flat
▪ Max RPM: 10,200
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61562 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61555 Grinding Wheel
The PFERD Performance Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200