Shop
Showing all 5 results
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt DW3983 Bi-Metal Portable Band Saw Blade
The DeWalt Bi-Metal Portable Bandsaw Blades are packed with a Matrix II High-Speed Steel Edge, 8% cobalt content, and Rc 65-67 tooth hardness, DEWALT Bi-Metal Portable Bandsaw Blades can stand up to extreme heat and wear. An alloy steel backer resists fatigue.
Specifications:
▪ Length: 44 7/8 Inches
▪ Teeth Per Inch: 18
▪ Thickness: .02
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
|
Diameter: |
1″ |
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45184 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 1 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 25,000
▪ Recommended RPM: 15,000