Shop
Showing all 7 results
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
AlcoTec ER4043 Aluminum MIG Wire
AlcoTec ER4043 Aluminum MIG Wire
Alcotec ER5356 Aluminum TIG Rod
Alcotec ER5356 Aluminum TIG Rod
AlcoTec Almigweld Aluminum TIG Welding Rod of is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 degree F melting range is classified as a general-purpose type filler alloy. Rod is used in a wide variety of applications as it has moderate high strength capabilities. It obtains white color when anodized and is associated with ER5356 class of rod.
Features:
- Trade Designation: Almigweld and Altigweld
- Non-Heat treatable
- Similar to AlMg5 (DIN)
- EN ISO designation AlMg5Cr(A)
- Principle alloying elements: Magnesium, Manganese, Chromium, Titanium
- Moderate high strength capabilities
- Applicable specification: ANSI/AWS A5.10 (ER & R)
Miller 3/64″ Contact Tip For Up To 400A M-Series MIG Guns
Miller 3/64″ Contact Tip For Up To 400A M-Series MIG Guns
Miller 3/64” Contact Tip
For use with M-25 and M-40 MIG gun (standard gun on most Millermatic 200, 210, 212, 250, 251, 252, 300 and Vintage MIG welders)
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62288 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 7 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 8,600
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: |
7″ |
Pferd 7″ X .045 Cut-off Wheel, 7/8″Ah – Type 27
Pferd 7″ X .045 Cut-off Wheel, 7/8″Ah – Type 27
Pferd 63175 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 7 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Depressed Center
• Max RPM: 8,600