Shop
Showing all 20 results
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 08-B 462 HP Combo Wheel
The Walter high performance all in one cutting and grinding 1/8” wheels set new standards for performance in combined depressed center wheels (for portable angle grinders). They are specially reinforced to withstand the stress in off-hand cutting operations. Whether cutting, grooving, notching or light grinding, these wheels are guaranteed to give you the longest wheel life, fastest material removal and maximum safety.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting, Grooving, Notching or Light Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inch
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63405 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63404 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/8
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 63057 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 60
▪ Shape: Flat
▪ Max RPM: 10,200
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit – Type 29
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit – Type 29
Pferd 62223 Polifan Flap Disc
The PFERD Performance Line SG Polifan Z-SG Power flap discs are some of the most efficient flap discs available. This line of flap discs feature significantly longer tool life, higher aggressiveness throughout the entire tool life, and a premium zirconia coating for high stock removal rates.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 60
▪ Shape: Conical
▪ Max RPM: 13,300
▪
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit
Pferd 62178 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 60
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 9″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61564 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61562 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61555 Grinding Wheel
The PFERD Performance Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61002 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Centre
▪ Max RPM: 12,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61001 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
· 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure
· PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes
· Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling
· Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys
3M™ Cubitron© II Fibre Disc 987C offers significant gains in productivity on medium to heavy-duty operations with our exceptionally high-performing 3M Precision Shaped Grain combined with a stiff fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other fiber discs””all with less grinding pressure.
3M™ Cubitron© II Fibre Disc 987C is suitable for use on almost all metals and excels in stainless steel and other nickel alloy applications. It is ideal for weld removal, beveling, removing mill scale, pits and imperfections, and more. Because 3M Precision Shaped Grain generates an exceptionally high cut-rate with less pressure, operators can finish tough tasks faster and with less fatigue. A grinding aid incorporated on the disc makes this an outstanding product for all types of metal””it helps keep the disc cooler on stainless steel and heat-sensitive metals such as nickel alloys and titanium, thereby reducing metal discoloration/oxidation and the chance of heat-related stress cracks. Moreover, because the abrasive itself stays cooler and sharper, our 3M Precision Shaped Grain discs last significantly longer than conventional ceramic grain discs, delivering a lower cost per grind with fewer disc changes.
Our 3M™ Cubitron© II products have raised the bar for high-performing abrasives. 3M Precision Shaped Grain outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.
To create 3M Precision Shaped Grain, our engineers started with 3M™ Ceramic Abrasive Grain and used proprietary technology to form the grains into triangular structures and electrostatically orient them on the backing to form sharp peaks that maximize cutting potential. These peaks slice cleanly through metal, rather than gouging or plowing as traditional abrasives do, and continuously self-sharpen as the points break off. This generates a super-fast cut and lessens heat build-up due to friction, reducing heat-related stress cracks and discoloration.
3M Precision Shaped Grain also wears evenly, and because the abrasive itself stays cooler and sharper, 3M™ Cubitron© II products last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications.
Fiber discs are heavy-duty discs ideal for weld removal, grinding, and blending large and small areas of metal surfaces. They feature a tough, stiff backing made from vulcanized fiber that resist wear and can handle tough grinding applications.
Specifications | |
Abrasive Material | Precision Shaped Ceramic Grain |
Abrasive Trade Name | Cubitron II |
Applicable Materials | Cobalt & Nickel Alloy, Stainless Steel, Titanium |
Applications | Grinding; Metal Stock Removal |
Body Material | Fiber |
Bond | Resin |
Brand | 3M ABRASIVE |
Color | Orange |
Dia. [Nom] | 4 1/2 in |
Grit | 60 |
Mounting | Threaded Hole |
Speed [Max] | 13,300 rpm |
Style | 987C |
Type | Fibre Disc |
Used With | Right Angle Grinder |
3M 2″ Cubitron ROLOC Fibre Disc 60 Grit
3M 2″ Cubitron ROLOC Fibre Disc 60 Grit
60 Grit Medium Grade Ceramic Roloc
3M Roloc 977F Orange 2″ 60 Grit Ceramic Coated Quick Change Disc has Cubitron abrasive grain that durability, extended life and fast cut rates. Medium grade disc featuring YF weight flexible cloth backing runs at the maximum speed of 25000 RPM and is ideal for grinding, blending and deburring of light to medium pressure applications for virtually all metal type. Disc has water resistant polyester cloth backing with a laminated cloth for added durability.
Features
- E-clutch activates when a pinch – stall is detected, shutting down the motor
- Dust ejection system technology to protect the tool from damaging dust and debris
- Power-off advanced overload protection which shuts off the tool before over-heating
- Slide switch – no lock-on option
Specifications
- Color: Orange.
- 50 count
Pferd 1-1/2″ X 1″ Quick Change Flap Wheel 60 Grit
Pferd 1-1/2″ X 1″ Quick Change Flap Wheel 60 Grit
Quick Change Flap Wheels – Aluminum Oxide A
This flap wheel spins on and off without tools. Unique design prevents shaft from pulling out of core while maintaining perfect balance at operating speed. Each package contains 1 shank adapter with 1/4-20 thread.
Specifications:
Diameter: |
1-1/2″ |
Pferd 3″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 3″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45208 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 3 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 20,000
▪ Recommended RPM: 4,800
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 1″ X 1″ X 1/4″ Flap Wheel 60 Grit
Pferd 45184 Mounted Flap Wheel
Pferd mounted flap wheels are supplied with the standard shank length of 1-1/2”. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configurations. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. Mounted flap wheels achieve their best performance at a recommended cutting speed of 3,000 – 4,000 SFPM. This provides the ideal compromise between stock removal, surface quality, thermal load on the workpiece, and wear to the flap wheel.
Specifications:
▪ Diameter: 1 Inch
▪ Length: 1 Inch
▪ Shank Diameter: 1/4 Inch
▪ Grit: 60
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Material: Steel, Non-Ferrous Metals, Cast Iron, Plastics
▪ Max RPM: 25,000
▪ Recommended RPM: 15,000
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 42517 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 60
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A